Printable View
I just received a Junxbox Premium HD from AliExpress. Had lost a lot of channels on my old Dreamlink. Took it out of the box, made the transponder changes and have the channels I wanted back. Quicker than the Dreamlink in some aspects but a little glitchy in other regards- was just guessing on setup processes but got through it. Seems to work OK- 120 C$ to my door- figured it was worth the gamble.
So this thing is working on 91 with the changes?
Apparently so, the only thing with Jynxbox/Junxbox is that after version 3 it is supposed to be a clone ?Quote:
Originally Posted by squirtNcider
Too many Variables to my Liking, I'll stick with my SV8000HD even though it is as Old as the Hills etc........lol
I can’t comment on all channels working on 91 but the ones i usually watch that were gone on my Dreamlink are working.
I did end up getting mine today but will just have it sit here until 82 goes bye bye.......For $107 CDN delivered, I took the chance in case I need it down the road.
Hi mateQuote:
Originally Posted by auggie
I just got my box Premium HD,how did get 91???
I went to Nimiq 5 72.7W and that where 91 showed up.
Nimiq 4 scanned 380 channels but how many open is another question.
Also this Junxbox has terrible Manu,remote does not work well,you have to point to the box otherwise does not respond-nothing like Dreamlink.
No EPG,very few channels get EPG.
That box cannot replace Dremlink
Nothing can be compared with Dreamlink.Quote:
Originally Posted by auggie
I don't have a Junxbox/Jynxbox to play with so can't tell you much on it
Other than I would suggest to do some reading/searching in the Jynxbox receiver forum
Dreamlinks are TOAST so I suggest moving on to what works.
Is 91 still only SD quality or since 82 sat. channels are moving over will they be in HD?
Yes, 91 now has both SD and HD channels.Quote:
Originally Posted by gene
As channels disappear from 82, they move to 91 and will be in HD.
Checked a friends sub last week. She only has 91 lnb but gets most HD channels.
I didn't compare channel by channel, just scanned thru and it seemed she had most channels in 800's, 1000's, 1200's, 1400's, 1500's and 1600's.
Did notice there was some missing but would say more than 80% of the HD channels were on the 91 sat.
I just received mine today and trying to set it up and I also went to Nimiq 5 72.7w to find 91. any way of fixing it or changing it so it matches up? I'm only getting approximately 320 channels.Quote:
Originally Posted by gramadaca
Approximately how many channels are on 91 as I'm only getting at most 300 but only TSN 2 missing the rest. I changed transponders 1-19 but after multiply scans still not pulling up channels. Any help would be appreciated.
All the TP's are to be changed 32 of themQuote:
Originally Posted by gene
I’ve changed them all now to 21500 and to turbo but still not getting most sport channels. Is there something else that needs to be changed?
The Fec needs to change to 3/4A and Turbo8pskQuote:
Originally Posted by gene
I'm having issues trying to find the Fec that needs to be changed to 3/4A. What category is it under on the Junxbox? Thanks.Quote:
Originally Posted by auggie
Not sure if the Junxbox has that feature, but it would be under the TP# list where you can edit the Tp'sQuote:
Originally Posted by gene
most likey where you edited for Turbo8psk etc.
Junxbox doesn’t have that option. I’ve scanned upwards of 15 times and not getting TSN channels. Each time I scan I get between 250-320 channelsQuote:
Originally Posted by auggie
Welcome to the CLONE BOXES, etc.Quote:
Originally Posted by gene
Gene, I also found 91 shows up on 72.7 BUT they also show up at 91 also ... scan in BOTH sats ( even though your actually scanning in the same 91 sat ) You will find you get a lot more stations to come in... now if only there was a way to change setting to 3/4A ... without any you miss a lot of TPs when scanning and I find manual scan hardly ever comes up with stations, and a full scan gets different tps to scan each time but there 3 or 4 that never want to scan than channel list gets double and triple listings!? But? if you want iks, not many other choices at this point. anyone find out how to get each tp to scan in better? I am all ears
From my understanding with the Junxbox or Clone Boxes you have to do MULTIPLE SCANS to try and
Pick up extra channels that are skipped-over or left behind etc. I would also hook up direct to receiver
when doing the scans (no switches, discque,etc. in the mix)
Hello,
You don't have a right Satellite,
Nimiq 91 it's Nimiq 1 91.0 W and Not Nimiq 5
Go to Installation Setting
LNB 11250
Check also You're Port DiseqC 1.0
Polarity Auto
You're supposed to see Dish Setting Nimiq 91 in the upper
Also check the transponder set to 21500
It's a resume not full install...
just got my junxbox but before i plug it in, is it possible to plug in an older box like dreamlink or limesat and bring in 91 ? i know they're door stops now but just for checking the signal...not transponder adjustment, strictly for signal.Quote:
Originally Posted by peterpeete
You can, but a older Bell/Dish receiver works better for checking signal, Go to dishpointer dot com and putQuote:
Originally Posted by dennytoto
in your location & what dish equipment you are using, it will give you the info where to point dish etc.