LNBF for Sat 129W

[krab]

I have new "Megasat MS1075" KU-Band LNBF, RF: 11.70/12.20 GHz, Lo: 10750 GHz

Can I use this for 129W for the HD Channels, currently have SV8000 STB

Thanks

[Terryl]

Nope, that is a linear LNB, good for satellites like 97 West.

Get a DP dual LNB, (like the one below) or one that will work in the 12.2 to 12.7 GHz band, with an LO of 11250.

13596

[krab]

OK Thanks.

This looks like the DP single that I used for SAT 61.5W for the HD Channels. Still in good working condition.

Can I take and use it for SAT 129W HD receptions ?

[Terryl]

Yup, that one will work fine.



If your within 129 West's foot print.

Look at the link below to see if you can get it, and it will also show you the size of dish needed at your location.


http://www.satbeams.com/footprints?norad=33453

Select the CONUS beam, then zoom into your location, once you do this then click you mouse on it, this will tell you if you can get it, and what size dish is needed at your location.

[krab]

Anyone in Phoenix, AZ. I currently have 36" Superdish.

What size dish needed for the 129W for HD channels from this bird ?


Thanks,

[Terryl]

Anyone in Phoenix, AZ. I currently have 36" Superdish.

What size dish needed for the 129W for HD channels from this bird ?


Thanks,

You didn't check out my link, but I did it for you, it says a 21" will work, you have a 36" so your set.

[krab]

Hi Terry,

Sorry forgot the link.

Thanks for your research and all your help, its very much appreciated.