How to setup zinwell 4x4 multiswitch for 2 receivers fta?

[gwrowe]

My sister and son each have a receiver, the receivers are a Nfusion Phoneix and a SV 360P, tried to use 2 4x1's but the one receiver steals the S/Q of the other, recently got a 4x4 zinwell switch, because I read a post of someone who is using one for fta, and a 2 stb setup! Could someone help me, as to let me know what to change the settings to, in each reciver to get it to work.

[stman]

You could have resolved the diseqc issue with grounding. Zinwell 4 x 4 switches are 22khz switches. You need to set the off and on by where you have the cables connected with each receiver.

[gwrowe]

Thanx for your quick response, I will try grounding the switches first and see if it works, if it don't, what do I turn off and get's turned on to make this switch work.

[WillDekkard]

The 2nd pic on the bottom:
http://www.satfix.net/attachment.php?attachmentid=13156&d=1329029319

[gwrowe]

I have just found out another friend of mine, wants to add a third receiver and another sat, like 91, what do I need to do this, and how to set it up? THanx in advance!