lnb bracket

[1881willy]

Can I use a 101/110/119 bracket to get 110/119/129 on a 18x24 dish.. Thanks

[StanW]

Can I use a 101/110/119 bracket to get 110/119/129 on a 18x24 dish.. Thanks That will work fine - assuming that the 3 are available from your location with that size dish , check dishpointer.com

[1881willy]

That will work fine - assuming that the 3 are available from your location with that size dish , check dishpointer.com

Many thanks StanW. Already checked dispointer. Was just wondering about the spacing on the bracket.

[WillDekkard]

Can I use a 101/110/119 bracket to get 110/119/129 on a 18x24 dish.. Thanks

As Stan stated, that will work, however you will most likely need to adjust the 129LNB as it is an extra degree difference from the bracket.

[1881willy]

Can you tell me how to adjust? Thanks.

[StanW]

The lnb (129)should have a bit of play in the holder - twisting it slightly , in the direction of the 119 lnb, will make up for the 1 degree difference in the bracket . There might not be a need for it - you'll have to perform the tweaking once you get the dish pointed.

[homer_™]

It will work but you will have to modify the bracket to hold the 129 lnb on the left side of 119 (outside the bracket) the 101 slot has to be empty.
An epliptical dish should be used.

[StanW]

... how about putting 110 in 101 slot , 119 in 110 and 129 in 119?

[1881willy]

... how about putting 110 in 101 slot , 119 in 110 and 129 in 119?

Thanks StanW. That is the way I plan to use the bracket.

[1881willy]

[QUOTE=1881willy;579558]Thanks StanW. That is the way I plan to use the bracket.[/QUOTE

Just to follow up. Used Dishpionter for setup and reaimmed and works perfect for 110/119/129.
Thanks again, Willy