Need help connecting 3 receivers

[eshan]

hi every one i have 2 dreambox500 receiver and i just bought another Sonicview Sv 360Pvr receiver. and currently have installed 2 dish. 1 is 18' sat 91w which have 1 dual lnb 10750 frequency and now the second one is 33' dish with 1 single lnb for sat118/119 11250 frequency and second lnb is also dual 10750 frequency for sat110. all 3 lnb are connected to DSw-41 Diseqc umschalter 4hq(900-2400mhz 4 way Diseqc Switch) and have only 1 output to 1 receiver which i am using for 1st dreambox500 receiver so the quesiton is i want only sat119w for other 2 receiver so which switch should i use? or any other suggestion please help.

[bkr™]

Is the lnb for 119w/118.75w is it a dn or aftermarket lnb. Are the lnbs for 91w and 110w dn legacy or dp or aftermarket?
The lnb freq in your setup menu should be 11250 for 91w and 110w (they are circular type).

[eshan]

hi
its after market lnbs. only 91w lnb is dn one freq for 91w is 11250 and 119w/118 is after market one freq10750 and the 3rd lnb is also aftermarket for sat 110w freq 11250 and i dont have any idea what is leacy or dp?

[eshan]

Is the lnb for 119w/118.75w is it a dn or aftermarket lnb. Are the lnbs for 91w and 110w dn legacy or dp or aftermarket?
The lnb freq in your setup menu should be 11250 for 91w and 110w (they are circular type).

hi
its after market lnbs. only 91w lnb is dn one freq for 91w is 11250 and 119w/118 is after market one freq10750 and the 3rd lnb is also aftermarket for sat 110w freq 11250 and i dont have any idea what is leacy or dp?

[WillDekkard]

DishPro or DishProPlus use "Bandstacking" in which both Right(Odd)[13v] & Left(Even)[18v] Polarities are carried on 1 cable rather then 2 as with Legacy/Standard LNBs.
More Info:11134


If you have a SV360Elite(dual tuner) you will need a 4 receiver setup, if you do not then just a 3 receiver setup is fine. Below is a Legecy or standard LNB setup(2 versions):
http://www.satfix.net/attachment.php?attachmentid=11133&d=1312954449

[robg1965]

I am setting up the first example using three multi switches feeding 4 diseqc switches does anyone know the 22 khz settings for each fta receiver I have been told that 22khz has to be on with certain ports if not the switches will burn out eventually.

receiver 1
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?

receiver 2
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?


receiver 3
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?

receiver 4
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?

[WillDekkard]

I am setting up the first example using three multi switches feeding 4 diseqc switches does anyone know the 22 khz settings for each fta receiver I have been told that 22khz has to be on with certain ports if not the switches will burn out eventually.

receiver 1
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?

receiver 2
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?


receiver 3
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?

receiver 4
sat 110
diseq port1
22 khz -off/on-?
sat 119
diseqc port2
22khz-off/on- ?
sat 91
diseqc port3
22khz -off/on-?

There are NO 22KHz switches in the first setup or the 2nd one, for that matter. All receiver settings for 22KHz are set to OFF.

[robg1965]

Thats all I needed thanks.