118/119 on a 33" Dish

[charizard]

i dont know how to start a new post so forgive me if im using this discussion.. i have a problem in my signal using 33"+10750 lnb for 118-119.my problem is i did not get all the quality in all the TPs, which means some of them i can get the strength and quality some of them tps dont do i need to change LNB? ur help greatly appreciated thanks

[WillDekkard]

i dont know how to start a new post so forgive me if im using this discussion.. i have a problem in my signal using 33"+10750 lnb for 118-119.my problem is i did not get all the quality in all the TPs, which means some of them i can get the strength and quality some of them tps dont do i need to change LNB? ur help greatly appreciated thanks

Here is your very own thread. Many TPs on 119 are what called "Spot Beams" and only point at certain areas of the continant. Some of the other TPs are what called "CONUS" Continantal United States. Unless you are within that certain spot beam, you will not get it.

[bkr™]

i dont know how to start a new post so forgive me if im using this discussion.. i have a problem in my signal using 33"+10750 lnb for 118-119.my problem is i did not get all the quality in all the TPs, which means some of them i can get the strength and quality some of them tps dont do i need to change LNB? ur help greatly appreciated thanks

When you use lnb oscillator freq 10750 you will only set your receiver to download the tp freqs from 11700 to 12200 which equals 1450 down to 950 mhz needed for the receiver to process. This results in reception of 118.75w only. 119w requires lnb oscillator freq 11250 so the tp freqs of 12700 down to 12200 equals 1450 down to 950 mhz again needed for the receiver to proces. You may want to specify exactly which dish and lnb you are using.