Ok Im stumped HELP !!!

[suec729]

ok guys I have been using my dreamlink hd receiver for several years never had a problem Just recently I started to get bad or no signal on all my channels .... Thought it might be the lnb so I bought a new one ..... hooked up same problem bad or no signal ...so next step check wire and connectors still same problem .... got neighbors dreamlink hooked it up no go same thing bad or no signal How many folks think it a defective lnb the one I just bought to replace any help would be great !!!!!

[dukeathome]

Sats are set up properly in installation?

[lobsterpot]

did you check your switch ? what is your set up?

[suec729]

lobsterpot what switch are we talking about ??

[suec729]

I did check my diceqt on all 3 birds and they are good on the fta when I swith 2 to 1 or any other still no signal

[fonger]

did the sat dish move? winds, crazy birds, bad football throw.. :)

[suec729]

not to sure but all the above is possible

[Terryl]

A bit more info on your setup would be helpful.

Number of satellites your looking at and their sat numbers (110, 119, 129 or 82, 91 what)

Types of LNB's and dish setups?

Type brand of Diseqc switch.

And did you have any heavy wind/rain storms lately ?

[fta_power]

So sorry to highjack, but I have 3 boxes have no signal too, I don't know why, something wrong with the DN Net.
I have test any check everything are good, still have no signal for 2 weeks.

[suec729]

I got signal at my friends house last night But now I am getting Ethernet is un-plugged with it plugged in ...... Any idea why this would happen now ..... Thank you guys I do really appreciate all the responses I am getting !!!!!!

[jvvh5897]

Sounds like a power supply issue. Maybe one that is heat intermittent--signal at your friends house because box was cold, but warmed up at your home and signal problem came back? Ethernet issue could be power too, but hard to tell.

[chad1976]

Do a fatory reset 3 times in a row. Then turn off on back. THEN BACK ON Then scan all sat.Make sure u have a good switch that is brand new. T

[pax]

If you are using a switch I would bypass it and hook direct to RCVR . Be sure the replacement LNB is the same IF , 11250 IF. How did u check wiring ? Use a meter at the lnb end to see if you have the correct voltage. Be sure the dish did not move. Start there.

[suec729]

Ok folks finally got it YAHOOOOOO It was my REPLACMENT lnb I bought off e-bay the jerk sold me a bad LNB Time to leave some feedback Thank you guys for all your help !!!!!!!