linkbox 9000i local channels

[freedish]

first off i searched the forum for an answer but found none.
i have a linkbox 9000i local and when i scan for channels i never find cnn or history or syfi.
i found a channel file for 8000 hd but it wound work on my 9000. is there a channel file for the 9000 with the sats of 110 and 119? or a transponder list file? thank you

[041joy]

have you loaded the latest file ?

I believe Net90 Local_09Nov2015_V742 is newest
also when you scan try Normal Scan and Network Search Yes

[freedish]

i have done just that. newest file and scaned every way even blind scan. still missing channels. signal strength at 98%

[jedi]

Which satellites are you trying to scan?

[freedish]

just 110 and 119. i will be using lyngsat and adding all the transponders manually. then doing a scan on the transponders that i am missing

[freedish]

alright, i have tried everything that i can think of, scanning single sat, blind scan, adding the tps manually still cant get all the channels. would anybody copy their channels then share them? thank you

[041joy]

just thinking...

Have you loaded the latest factory file ??
load All Code + Boot
then you need to reboot with rear switch(most people will never do this step)

then load the latest File the same way and reboot with rear switch

all the transponder changes have been added to the latest file so no need to make any changes
just set your LNB/Dish/Switch settings and Multi Sat Search with NetWork Search ON

you will see several failed and several OK
just let it finish
works for me

[freedish]

the two files are first the factory file 9000i local_15Oct2015_V111 all code and boot, power off then file two, all code and boot Net90 Local_09Nov2015_V742. the problem is that all the transponders r not showing up

[041joy]

same files working great here...
no issues with transponders or missing ch's
just set up sats with corrct settings and scan with network search On
no need to edit anything

[freedish]

did everything. missing history 1 syfy and cnn among others. scanned about 6 times still no luck. even manually added transponders and still no luck. if i had a channel file i would share it but i suppose it may be to much to ask from others. thank you

[jedi]

I just have Bell 82 and 91 so far - so can't help with a file share right now.

[freedish]

ok thank you jedi

[041joy]

hey freedish
I had issues trying to use ch list from one of my boxes to the other.I had to set up the other reciever and scan .
never could find the problem or why It wouldn't work.both are 9000 locals
I also notice no one has posted any ch files for these so that may be a reason why.
don't mind helping at all
I would do a factory reset( I know you lose your server info)
reset server info
set the Sats you want and make sure Dish Settings are correct
then go to Multi Satellite Search
don't mess with any transponders
set Scan Option to All
Scan Channel to TV + Radio
Network Search to Yes
Normal Scan
and start scan

Hope that helps