No channels with DL100 installed

[geevee]

Installed a new Green DL100 with heat sink.
Did a factory update and loaded in new file T4_109_810P as per instructions.
Went to manual scan for 110:
Freq=12.224
s/r = 21.5
Pol= V
trans= turbo 8psk
search = all chann
Network scan= on
signal and qty = 97%for both

No channels come up for either 110 or 119 when I scan them
No channels if I change network scan to off or on
or if polarity is V or H

If I take out the module and load back T4_0190_625P
and scan I can get some channels.

Any info on what to try to get some tv.. thks

[nobodyspecial]

did you factory set after loading file?
quality bars blue?

[geevee]

Yes I did do that.
If I wanted to start from the beginning
Do I load the bootloader, then factory set?
then load the new file and then a factory set?
And then try to scan for channels.

[nobodyspecial]

all i did was load file,factory set,set up my sats and auto scan

[Panther71]

I don't know about the Green DL100 with heat sink if it works or not..

I installed this chip DL100 Blue module for dreamlink T4

Looks Like this

24849

Then I installed this file then you should be good to go...

http://www.satfix.net/showthread.php..._T4_0110_0810P

Then a Factory reset then power off, then turn switch off the back the wait about 10 secs, then turn back on, then set up sats and scan.

Hope it Helps you out...

[haggis]

Hi geevee, only my pennys worth here, you said manual scan// maybe try auto, scan?? I m only trying to help, ok, I gave up on this stuff, a while ago, I just keep coming back, as I have friends from way back, right, benney?? I used to have a limey, way back , got a jinxie, way back, tried scanning, nothing but bloody red, after a few days, of sore head, found out the bloody LNB was cracked and water in it. new LNB and away it went, up and going. Only trying to help here, I got myself a g box, thanks to our benney, Good Luck, geevee.

[Panther71]

It works great with info i gave and I did auto scan too.

[geevee]

I'll try that and I'll let everyone know what happens.
If it still does not work the I guess I need to find a blue module.
By the way, if I re-connet my old nano I get a few 119 channels so the hardware must not be the issue.

[wheresmystuff]

module color doesnt matter they both do the same thing, take it our and reseat the module and try auto scan with network search option to yes.

good luck. keep us up to date

[Panther71]

Like I Said I never tested the Green DL 100 Module so I cant say it doesnt work, But I know That I have the Blue DL 100 and its running Strong.

Only reason I went with blue bc its made by Korea and its was the latest one for Dreamlink T4..

When I did research people were saying that Green DL 100 were made in China so Thats why I chose Blue.

Please read the earlier post I put up there and do it Step by Step..

I di the auto scan not the manual scan it all came back up..

Thank You

[geevee]

I agree the green module will not work with the T4 because I followed the same steps you used for your blue module.

I will try to find a blue one but being in Canada it may be a hassel.

Let's hope one one of the many members comes up with a file that might resolve the issue.

Thks everyone for your help.

[Panther71]

Try Google?

I know you can still get them..

Pm where in canada..

[nobodyspecial]

I agree the green module will not work with the T4 because I followed the same steps you used for your blue module.

I will try to find a blue one but being in Canada it may be a hassel.

Let's hope one one of the many members comes up with a file that might resolve the issue.

Thks everyone for your help.

I have a green one and its made in korea from dreamlink The latest one from dreamlink is a dl200 which is blue
Patriot electronic have them

[geevee]

Thanks for the info