Need Help with Dish 1000 Plus(built in switch)Dish Settings for DL HD

[sarniaman]

Receiver/STB: Dreamlink HD V4
Dish Type: Dish 1000+
Dish Size: 30"
LNB Type: 110 , 118.7 , 119 , 129


I just Installed Dish 1000 plus for my DL HD T4 and VS Ultra with Gargoyle( I understand it cannot get HD 129).

Got the positioning from dishpointer. Got the elevation and Skew set.

I put the 129 in LNB IN

This has an Inbuilt Switch so I am not using any DPP44

Connected the power source to 1
And the DL to 2
Vs to 3

Can anyone help with dish settings for 119, 110, 118.7 and 129 on the receivers

110
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 11.250
LNB 22KHz: Off
Diseqc sw 1.0: 1( I know this is not right)
Diseqc sw 1.1: Off
Legacy SW: Off

119
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 11.250
LNB 22KHz: Off
Diseqc sw 1.0: 2
Diseqc sw 1.1: Off
Legacy SW: Off

129 Ciel 2
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 11.250
LNB 22KHz: Off
Diseqc sw 1.0: 4
Diseqc sw 1.1: Off
Legacy SW: Off

118.8 Anik f3
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 10.750
LNB 22KHz: Off
Diseqc sw 1.0: 3
Diseqc sw 1.1: Off
Legacy SW: Off


If I have the settings then I will work on my azimuth.

Please help!

[fn59]

110 should be diseqc 2
119 diseqc 1
If you're getting signal on 110, 119, and 118.7, then check the cable from 129 lnb to the aux port. Could also be something in the line of sight.
I think there is only one way to install the clip to hold the 129 lnb, so I don't think that would be a problem.

[hedley]

110
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 11.250
LNB 22KHz: Off
Diseqc sw 1.0: 2( I know this is not right)
Diseqc sw 1.1: Off
Legacy SW: Off

119
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 10.750
LNB 22KHz: Off
Diseqc sw 1.0: 1
Diseqc sw 1.1: Off
Legacy SW: Off

129 Ciel 2
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 11.250
LNB 22KHz: Off
Diseqc sw 1.0: 3
Diseqc sw 1.1: Off
Legacy SW: Off

118.8 Anik f3
LNB Power: ON
LNB Type: OCS-DP
LNB Frequency: 10.750
LNB 22KHz: Off
Diseqc sw 1.0: 4
Diseqc sw 1.1: Off
Legacy SW: Off

[fn59]

On the dish 1000+ 118.7 is shows up on port 3, 129 on port 4, when doing a check switch on OEM receiver.

[sarniaman]

Thanks fn59 and hedley.

119 on 1
110 on 2
118 on 3
129 on 4 worked for me.

Thanks again!