c-band

[john warden]

ok
I have got a DISEQC-BOX[VBOX7 I.2 POSITIONER] Hook up to my nanoe 2, I have no problem with moving the dish from east to west and also freq is 5150 now WHERE does the coax from the box go to the back of the nano2 receiver, it says receiver on the back of the box but I don't know where to hook it in on the ba ck of the receive.

blueduck

does the computer have to pluged into the nano2

[Terryl]

For "C" band you don't need the computer.

The coax from the connection on the "V" box marked "Receiver" connects to the LNB in on the Nano 2 receiver.

For information beyond this I would contact Costactc, he's the "C" band guru around here.

Or wait a few and he may pop in.

[Costactc]

For c band I use my 2 positioners as stand alone. Your vbox retains satellite positions. First you must set your east-west limits then you move from sat to sat and save the positions. I mark them down on a piece of paper so as to remember. There isn't any wire from the receiver to the vbox as it's stand alone. Your coax from the dish goes into the receiver.