Log in

View Full Version : freezing



firpo
06-04-2014, 02:19 AM
i got a new t5 set up running everything good. but now it just freezes i have 2 shut it down a few min than restart but after a bit it does the same. freakin thing is brand new. i think its the module. Can anyone shed some light on the situation? ty

calling all painters

surfinisfun
06-04-2014, 02:34 AM
Freezing would be caused from internet connectivity or the server you're running.

torpainter
06-04-2014, 02:38 AM
try reseating the module It could be over heating

surfinisfun
06-04-2014, 02:47 AM
Also if you are running more then one service, that could create a conflict.

Try one per south and north if that's applicable.

firpo
06-04-2014, 05:46 AM
i new u would come 2 the rescue if it works i get u a cape, but how do i reset it?
and i only have 1 service
ty paint

whoknows
06-04-2014, 11:11 AM
I believe he said reseat the module. Take it module out and then put it back to make sure it is in its' correct spot. ....I see you have NFPS. That service has been known to freeze.:tehe: jmo

firpo
06-05-2014, 08:36 PM
ok i havent done that yet but i took the cover off and its working fine at the present. also i have been leaving it on 24/7 in the past but the last few day i have been shutting it down @ night so i leads me 2 believe it was overheating. and ty 4 ur help guys


I believe he said reseat the module. Take it module out and then put it back to make sure it is in its' correct spot. ....I see you have NFPS. That service has been known to freeze.:tehe: jmo

pgjeepster
06-06-2014, 04:11 PM
put a small laptop cooling pad underneath the box

whoknows
06-06-2014, 05:15 PM
T5 doesn't overheat they hardly gets warm.

firpo
06-17-2014, 06:17 PM
mine is very warm i think the module is junk than


T5 doesn't overheat they hardly gets warm.

Mensam
06-17-2014, 11:01 PM
I am getting freezing as well on both my DLHD and DLHDT5.

nightstar
06-17-2014, 11:43 PM
There is possible ECM in progress.

dishuser
06-18-2014, 12:28 AM
There is possible ECM in progress.

for last 2 weeks?
bummer