PDA

View Full Version : dreambox 500s



pisici
04-22-2014, 04:16 PM
Hi,
I have a dreambox DM 500s with the key (DN) for Dish channel and I want to get these Arabic channel: MBC , rotana.

www.lyngsat.com/tvchannels/sa/Rotana-America.html

www.lyngsat.com/tvchannels/ae/MBC-International.html

I did the scan with frequence 10750 : for 12094 L, 12094 L, Anik F3 at 118.8 but I get only US channel.
thanks

Terryl
04-22-2014, 05:20 PM
Do you have the special LNB and the larger dish required for 118?

If not then you won't get much.

And please, no live outside links to other sites, take the http header and use hXXp, this will make them a dead link, I fixed yours for you.

Terryl
04-22-2014, 05:26 PM
If you want Arabic channels have you looked at whats on 97W?

hXXp://www.lyngsat.com/Galaxy-19.html

This satellite would require a larger dish (33" to39") and a linear LNB, but has a ton of open channels.

momospeed5
04-24-2014, 03:13 PM
Hi All,
I have a dish (39") with a linear LNB and have FTA arabic channel on 97 W but not MBC and rotana because these channel are on 118W as per Lyngsat.

www.lyngsat.com/tvchannels/sa/Rotana-America.html 118W.

Normally with 118 LNB or 119/118W you should have them. they are up.

You have to check which frequence perhaps 10750 and do the scan for all .