PDA

View Full Version : 2014 Newest! DM800SE-V2 SIM2.20



Angel Eyes
03-27-2014, 06:49 PM
*2014 Newest!!!! dm800se v2 Wifi 1GB Flash 512MB RAM Sim2.20 400Mhz Processor*

Specifications DM800SE V2 PVR HD TV Sat Receiver+Wfifi
1. SDRAM :512 MB/Flash :1024 MB
2. Rev E , Sim 2.20
3. Bcm4505 tuner
4. Engima2
DM800SE V2 Wifi Version sim2.20 DVB-S2 BCM 4505 tuner /ALPS-801A M Tuner /Triple Tuner option1) DVB-S2/S Tuner
2) Rev E Motherboard (Latest version )
3) BCM 4505 tuner /ALPS-801A M Tuner /Triple Tuner

4) Sim 2.20 Card
5) Built in Wifi

6) 400 MHz MIPS Processor
7) 2 x USB 2.0 ( 4 PIN USB Type A )
8) 2 x Smart Card
9) Colored OLED display
10) Frequency Range 950 - 2150 MHz
11)
12) Black & White colors are available
Dm800se V2 Wifi Strong HD Satellite Receiver

http://i00.i.aliimg.com/img/pb/235/201/097/1097201235_051.jpghttp://i00.i.aliimg.com/img/pb/112/197/097/1097197112_927.jpghttp://i00.i.aliimg.com/img/pb/231/201/097/1097201231_369.jpghttp://i00.i.aliimg.com/img/pb/171/197/097/1097197171_630.jpghttp://i01.i.aliimg.com/img/pb/227/201/097/1097201227_514.jpghttp://i01.i.aliimg.com/img/pb/161/316/069/1069316161_256.jpg

Product Description


•10/100MBit compatible Ethernet Interface
•HDMI connector
•plug & play Tuner
•colored OLED display
•plug & play slot for an internal 2,5" SATA hard disk

Technical Features

• 400 MHz MIPS Processor
• Enigma 2, Linux Operating System
• colored OLED - Display
• MPEG-2 / H.264 Hardware decoding
• Tuner: DVB-S, optional: DVB-C, DVB-T
• Tuner Module, Plug&Play
• 2 x Smartcard-Reader (Dreamcrypt CA)
• Mini USB for Service and software update
• 10/100Mbit Ethernet Interface
• 1 x Scart (RGB, FBAS or S-Video)
• HDMI
• 2 x USB 2.0 (e.g keyboard)
• analog modem
• S/PDIF Interface for digital bit stream out (AC-3)
• 64 MByte Flash, 256 MByte RAM
• SATA
- for internal HDD 2,5“
• unlimited channel lists for TV/Radio
• channel-change time < 1 second
• automatic service scan
• directly bouquet-lists
• EPG (electronic program guide)
• multiple LNB-Switching control (supports DiSEqC)
• OSD in many languages and skin-support
• Videotext Decoder
• extern 12V power supply
DVB receiver 800 HD se technical data
DBS-Tuner mit DVB-S2:
Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.264
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Mini USB service connector:
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

Analoge modem:
analoge modem for Internet connection

SATA Interface:
for internal 2,5" HDD

USB
2 x USB 2.0

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA

Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:
< 15W at 12V

External PSU
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 3,0A

grafcable
04-09-2014, 07:27 PM
Which file I can use for this receiver?