Set up

[Maxxjr]

OK I am at my wits end setting this box up. since yesterday I have been trying to get this thing to work to no avail. have followed the set up inst. to the letter several times but I still can'to get 110 & 119 to come in. I had my limesat connected and working great with 97 signal 89 quality changed nothing just hooked up the t5 and proceeded to set it up NO GO its like the bin is not letting sat config come thru. Have done severall resets and reloads of the factory and bin file still with no luck..Checked all connections including changing out the barrel connector put the limesat back and got signal as usual

Any help out there pleasse Maxxjr

[torpainter]

Post your hardware set-up and your settings.

[Maxxjr]

Ihave duel dish lnbs with one cable for two receivers nano and dreamlink pulling 110 &119 nano has 98 signal and89 quality the limesat that I replaced with the dreamlink had same signal I have no connection to any sattlites with the dreamlink
sat110
desequ 2

disqu 1.1 none

tp 11.250

lnb osc-dish

22kkhz off

no switch; they have internal switch

lnb power on

when i could not get it to work i put my limesat back and had instant picture with 98 sig and 89 quality

[Terryl]

Even thou the LNB has an internal switch, you still need to use the Diseqc switch settings.
Diseqc switch 1.0= yes, or on, or what ever.

Diseqc switch port #1 = 119
Diseqc switch port #2 = 110

[Maxxjr]

Even thou the LNB has an internal switch, you still need to use the Diseqc switch settings.
Diseqc switch 1.0= yes, or on, or what ever.

Diseqc switch port #1 = 119
Diseqc switch port #2 = 110

Thats what I have set up

[PremiereElite]

Why are you using lnb osc-dish? Isnt this suppose to be Dish pro LNB 11250?
Diseqc1.0.. PORT1 119
DiseqC1.0.. .Port 2 110

[torpainter]

Why are you using lnb osc-dish? Isnt this suppose to be Dish pro LNB 11250?
Diseqc1.0.. PORT1 119
DiseqC1.0.. .Port 2 110

No it should be ocs-dp

[torpainter]

Change the tp 11250 to (Dish pro 11250) scroll in the menu to find this... see if that works.

I gave the op the correct settings for dishpro twin.
You are telling him to change the settings to ones that dont exist on a dreamlink

[PremiereElite]

I gave the op the correct settings for dishpro twin.
You are telling him to change the settings to ones that dont exist on a dreamlink
Oooh ok np..

[Maxxjr]

Why are you using lnb osc-dish? Isnt this suppose to be Dish pro LNB 11250?
Diseqc1.0.. PORT1 119
DiseqC1.0.. .Port 2 110

Yes thats wht I got sorry didn't put it all in.