Good signal, 0 quality

[DJMark]

I have 95% signal! but my quality is at zero on BEV. Any ideas?

[torpainter]

I have 95% signal! but my quality is at zero on BEV. Any ideas?
Needs to be aimed properly?

[DJMark]

Needs to be aimed properly?

No. Other receiver with paid sub is working fine. Just the nano not working.

[hutch]

Nano premium SE is an SD receiver... HD TP's will often show 95% Signal & 0 Quality & not lock or scan... Same problem & result DJMark... you should get most of 91 ... but most of 82 wont come in on this receiver...

[DJMark]

Nano premium SE is an SD receiver... HD TP's will often show 95% Signal & 0 Quality & not lock or scan... Same problem & result DJMark... you should get most of 91 ... but most of 82 wont come in on this receiver...

Sorry. I don't get it. So is there anything I can do?

[Mavrick]

Sorry. I don't get it. So is there anything I can do?

The 82 sat is an HD sat, your nano receiver is SD, so it will only see the 91 sat. Make sure you are on 91W and if you still can't get a signal you may need to tweak your dish a bit, not all tuners are created equal and if your sub has a stronger tuner than the nano then you might have to re-aim your dish using the nano to hit the "sweet-spot" on 91.
Also check that your settings are correct on the nano, if your hitting 91 & 82 then you will need to adjust the nano's settings for the switch/lnb you are using.

[lobsterpot]

Sorry. I don't get it. So is there anything I can do?

buy a hd box and u will get the channels on the 82 sat .