krawiec
03-09-2014, 11:05 PM
I would like to share interesting story with mine Dlnk Hd and sk200 board.
I own dreamlink hd for about 2 years without any issues. The way i have set is sat 110,119 &118.8 and 129 all on 30 inch round dish, so everything worked excellent with occasional "bad or no signal" issue which everyone has from time to time. Then i decided to add B*V to my setup included the 82 and 91 on separate dish and sw22 khz to switch beetwen them on the 4th diseqc port and everything seems to work fine for about 2-3 days till one day the box would not show any channels or any info in the EPG with servers connected, try to look at the sat settings and I see that is not able to lock onto any of configured sats with message " unknown network" which indicated to me that sk200 has issues.
Next step was to swap the module back to SD which came with the box and SD channels work just fine.
After that order new module and waiting for it arrival.
Now the things got really interesting as i swap my b.v sat to my other box nano hd with the ls400 mod on it , so the setup for next box became same as dreamlink. Again everything was okay till about 2 to 3 days and one day i watched the nhl game on 82 and shut the box at the end of the game, came back around an hour later and none off the hd channels would work anymore, turns out the ls400 was shut dead. Insert a new ls500 which i had on me and the hd channels work again.
After all that remove the 82 from configuration and hope it will not happen again.
The final conclusion is that not sure what is happening here but it definitely looks like a trend of some kind.
Did anyone ever run into same issue or will have any kind of explanation to this?
Any suggestion would greatly welcome , or i will have to say goodbye to 82 and that will suck a bit.
Regards K.
I own dreamlink hd for about 2 years without any issues. The way i have set is sat 110,119 &118.8 and 129 all on 30 inch round dish, so everything worked excellent with occasional "bad or no signal" issue which everyone has from time to time. Then i decided to add B*V to my setup included the 82 and 91 on separate dish and sw22 khz to switch beetwen them on the 4th diseqc port and everything seems to work fine for about 2-3 days till one day the box would not show any channels or any info in the EPG with servers connected, try to look at the sat settings and I see that is not able to lock onto any of configured sats with message " unknown network" which indicated to me that sk200 has issues.
Next step was to swap the module back to SD which came with the box and SD channels work just fine.
After that order new module and waiting for it arrival.
Now the things got really interesting as i swap my b.v sat to my other box nano hd with the ls400 mod on it , so the setup for next box became same as dreamlink. Again everything was okay till about 2 to 3 days and one day i watched the nhl game on 82 and shut the box at the end of the game, came back around an hour later and none off the hd channels would work anymore, turns out the ls400 was shut dead. Insert a new ls500 which i had on me and the hd channels work again.
After all that remove the 82 from configuration and hope it will not happen again.
The final conclusion is that not sure what is happening here but it definitely looks like a trend of some kind.
Did anyone ever run into same issue or will have any kind of explanation to this?
Any suggestion would greatly welcome , or i will have to say goodbye to 82 and that will suck a bit.
Regards K.