NANO HD_819 feedback thread

[Costactc]

Discuss this topic here....Upon pressing the guide button and pressing FAV, it takes a couple of minutes to load but when it does it's a full guide, enjoy...

[poppy]

When you load the file do you load with all code + boot code,thankyou.

[danny]

Once you load this file, can we load back our old data channel list.

Tried to load back old data channel list on top of this new file, it loads but the version in the info reverts back to 810.

Also is there away to save server information, so you do not need to input the server info every time there is a new file.

Also does this bin fix the issue of when selecting the channel in the epg, you can not select it by pressing ok, you need to select exit button to get the channel.

Also does if fix the audio lag (delay) issue?

[squirtNcider]

Yes. I also noticed I was having a prob scanning 129 and getting the channel names to show up, only had numbers but this time all the channels names showed up.

[poppy]

What did you load your file with.

[squirtNcider]

yes.....all code + boot. USB stick.

[Costactc]

Flashed 819, factory default, flashed channel list and setup server. I have a full guide and info showing 819 not previous file.


21063

[danny]

Thanks.

I must have done something wrong. Did you just download the channel list or all data? Also did u have to input the server info again. If so is their no way to save a server info. file?

I down loaded all data and that may be the problem. When u download all data the server info is also downloaded with it. However the names for the favorites gets defaulted to the original names and also the software version defaults back to 810.

[xxxjrxxx]

Hi , I bought a nanosat HD tv and I was ondering how I get the 119 and 110? they are not on the sat list? I download the v105 factory file first and then the 819 new bin , factory reset and I still dont get the 110 and 119 satellite. Any help? thanks.

[Irish]

does this new file give you a bev epg?

[Costactc]

Thanks.

I must have done something wrong. Did you just download the channel list or all data? Also did u have to input the server info again. If so is their no way to save a server info. file?

I down loaded all data and that may be the problem. When u download all data the server info is also downloaded with it. However the names for the favorites gets defaulted to the original names and also the software version defaults back to 810.

I had to re-input all server info.


Hi , I bought a nanosat HD tv and I was ondering how I get the 119 and 110? they are not on the sat list? I download the v105 factory file first and then the 819 new bin , factory reset and I still dont get the 110 and 119 satellite. Any help? thanks.

You need the v106 factory file which I didn't see posted here. I'll do it later if I get a chance. You could also just load v105 then flash 810 file and set up your sats and save all info to usb before reflashing the 819 file.


does this new file give you a bev epg?

Only being used for charlie in my case.

[gilbuilt]

Factory file not needed..just load 819 and (all code + boot) then factory default and do your sat setup and server info.
then watch TV...this receiver is getting better...they have promised new fixes next week,so let see what happens!!

[filippo]

hy does anyone know where to find the v106 factory file for nano hd,and is it importend

[PremiereElite]

hy does anyone know where to find the v106 factory file for nano hd,and is it importend

My neighbor said you only need the 819 file posted recently... gl bud

[notch67]

epg works great for bev and charlie now...thanks nano team

[Bill]

Is there anymore improvements other then the epg. I have not had any problems with the file epg. Did they correct the audio delay?

[danny]

epg works great for bev and charlie now...thanks nano team

Does this bin fix the issue of when selecting the channel in the epg, you can not select it by pressing ok, you need to select exit button to get the channel?

[Costactc]

Is there anymore improvements other then the epg. I have not had any problems with the file epg. Did they correct the audio delay?

The audio delay is still an issue when you exit the guide.


Does this bin fix the issue of when selecting the channel in the epg, you can not select it by pressing ok, you need to select exit button to get the channel?

No issue selecting a channel by pressing the ok button while in the epg.

[danny]

Is there a loader for this receiver. My receiver is not booting, it keeps on flashing "on" and "error" but no picture. I want to load back the factory file. Which loader do I use?

[danny]

Is there a loader for this receiver. My receiver is not booting, it keeps on flashing "on" and "error" but no picture. I want to load back the factory file. Which loader do I use?

Never mind. The Jynxbox loader with Null cable works.

[danny]

The audio delay is still an issue when you exit the guide.



No issue selecting a channel by pressing the ok button while in the epg.

Selecting the channel from the guide issue still not fixed with 819. You still need to select the exit button to go to that channel.

[Costactc]

Selecting the channel from the guide issue still not fixed with 819. You still need to select the exit button to go to that channel.

I realise that. You had mentioned pressing ok in the guide would not change the channel which I found odd as I had never had that problem. Lets say this receiver, as almost all once released, is a work in progress.

[Marcella]

epg works great for bev and charlie now...thanks nano team

Interesting,

[#1tiny]

There is still no epg for bev.

[Snow]

819 not wrkng after dawnlading from file section

[PremiereElite]

819 not wrkng after dawnlading from file section

After you download the file, you have to extract it with either winzip or winrar before you transfer it to USB, after that is done you should select all code + boot code in Menu. gl

[Bill]

Problem extracting 819 ra file on windows 7.When downloading to computer it shows a squire page instead of a stack of books? Disregard. Had to download the ra program.

[msi2k]

I have the channels (118/119) scanned, but they are listed sequentially and not using their SID (actually channel numbers).

Could anyone help me get the channels sorted using their actual channel numbers?

[amok]

Factory file not needed..just load 819 and (all code + boot) then factory default and do your sat setup and server info.
then watch TV...this receiver is getting better...they have promised new fixes next week,so let see what happens!!

Is it next week yet???

[ftv]

Is it next week yet???

There was next bin week after but not public and two more after that:no:

[filippo]

There was next bin week after but not public and two more after that:no:

WHY WAS IT NOT PUBLIC :confused:

[bigdarin]

there is one thing they can fix or add renumbering for bev like the nano premium se

[#1tiny]

WHY WAS IT NOT PUBLIC :confused:
I agree. Cause there support sucks.

[filippo]

I agree. Cause there support sucks.

it realy sucks the box is good and the picture quality is realy good if the support comes on they may have the best hd box and their sales will increase

[Marcella]

Good Box ,great audio/vid, but I think their support walked us down the isle again, and this time the didn't kiss us first. lol lol lol

[lappitto]

Hi folks, I was able to setup a nanolite and I just bought a nano HD and I don't know where to start to set it up. the menu is different from the nano lite. I don't have much experience and I was wonder if there a list of steps A to z.

Any help is much appreciated.

[dishuser]

Hi folks, I was able to setup a nanolite and I just bought a nano HD and I don't know where to start to set it up. the menu is different from the nano lite. I don't have much experience and I was wonder if there a list of steps A to z.

Any help is much appreciated.
look in files/guides section

[amok]

look in files/guides section

Obviously this helpful hint is useless because if the poster had looked in the files section it would have been obvious that there are no guides for this receiver. It has some redeeming qualities, but the support to date is lame because there are many simple fixes that would have quickly made it a serious contender. Something tells me this receiver isnt going to be around too long. It is mainly being sold in Canada which may be why the support has been limited.

[dishuser]

Obviously this helpful hint is useless because if the poster had looked in the files section it would have been obvious that there are no guides for this receiver. It has some redeeming qualities, but the support to date is lame because there are many simple fixes that would have quickly made it a serious contender. Something tells me this receiver isnt going to be around too long. It is mainly being sold in Canada which may be why the support has been limited.
then make a setup guide and be useful

[amok]

then make a setup guide and be useful

Sorry.... but I dont pretend to be an expert, and my Nano is parked waiting for a better software release.... if it ever arrives.

[Costactc]

Sorry.... but I dont pretend to be an expert, and my Nano is parked waiting for a better software release.... if it ever arrives.

Are you kidding me???? You are leaving a receiver on the side for a sw update when it works...some people are never happy no matter what. I'm enjoying my crystal clear hd picture with my nano hd.

[dishuser]

Sorry.... but I dont pretend to be an expert, and my Nano is parked waiting for a better software release.... if it ever arrives.
nor do you pretend to be of any help
send it to me and I'll make a guide

[amok]

Are you kidding me???? You are leaving a receiver on the side for a sw update when it works...some people are never happy no matter what. I'm enjoying my crystal clear hd picture with my nano hd.

Maybe you could write a guide if you have it all figured out. I am sure folks would find it helpful and you could let dishuser know when you have put it in the files section.

[Costactc]

Maybe you could write a guide if you have it all figured out. I am sure folks would find it helpful and you could let dishuser know when you have put it in the files section.

I don't need a guide.

[#1tiny]

I don't need a guide.

The nano sucks period. No support, no guide on north.

[freereign]

thnx now i know to go with dreamlink

[dishuser]

The nano sucks period. No support, no guide on north.
RULE #1
~FLAMING & BASHING~
We will not tolerate any flaming, bashing, mocking or any other form of disrespect to any member, nor will we tolerate such manners of disrespect directed to other FTA sites, Manufacturers of FTA Receivers, or Coders.

[ftv]

The nano sucks period. No support, no guide on north.

When I read your posts about nano hd i came to conclusion that the box is not designed for retards lol
Is that the case?

[Costactc]

The nano sucks period. No support, no guide on north.

Obviously rule # 1 has been broken....first warning.

[JCO]

When I read your posts about nano hd i came to conclusion that the box is not designed for retards lol
Is that the case?

Now that the rules have been explained and their enforcement applied we can get back on topic.:D

[#1tiny]

When I read your posts about nano hd i came to conclusion that the box is not designed for retards lol
Is that the case?

I can't say a box sucks but you can call people a retard??

[ftv]

Now that the rules have been explained and their enforcement applied we can get back on topic.:D

I just want to report bin running without any problems other than bev epg:no:

[#1tiny]

I just want to report bin running without any problems other than bev epg:no:

I want to report the file has lots of bugs. Guide doesn't stay updated long. Sometime takes 3 times updating to get it updated. Pvr needs lots of work,the sound still takes 4-5 sec's to come in when changing channels or going on and off guide.

[ftv]

I want to report the file has lots of bugs. Guide doesn't stay updated long. Sometime takes 3 times updating to get it updated. Pvr needs lots of work,the sound still takes 4-5 sec's to come in when changing channels or going on and off guide.
Hmmm On my box when i am going off guide it takes 3.5 seconds from my precius time wow lol

[longaniza]

Does anybody happens to know if it can be used now to get Amazonas and Sky Mexico?

[jets]

I am heading out to help a friend. Do I just load the 819 file or is there also like a TP file? If so I looked in file section and I don't see any kind of a TP file. Will check back in a bit once at friends place maybe it's in the 819.

TIA

[Costactc]

I am heading out to help a friend. Do I just load the 819 file or is there also like a TP file? If so I looked in file section and I don't see any kind of a TP file. Will check back in a bit once at friends place maybe it's in the 819.

TIA

Just load the file, factory default and rescan your sats.

[squirtNcider]

I would assume the support is done for this box? My only real issue is I wish it had auto TP.....

[danny]

I would assume the support is done for this box? My only real issue is I wish it had auto TP.....

And also they never really fixed the guide for north.

[SpaceCowboy]

Like any other NEW Receiver on the market, this one also needs some time to find out what is wrong and correct them....What is the PROBLEEEEM???

[abouttosnap]

I could be wrong here but seeing that there has not been any new files out for this unit in over a year I would say this unit is about as good as it is going to get...just my opinion.

[chad1976]

Bev still works

[dishuser]

Bev still works
what about dn?:rolleyes:

[Neil Armstrong]

what about dn?:rolleyes:

Yea it works..Once you edit the TP,s

[anngreg]

still going strong. just that I do not need to use it anymore