Dreamlink hd sudden lost of channels

[krawiec]

Guys any help would greatly appreciated as I encounter this strange issue with my ddreamlink hd today.
- everything was fine and dandy then suddenly i started to have intermittent problems with scramble picture
- once rebooted all the network and picture came back for a while then the problems started again
- checked the signal and the server connection and everything looks okay , signal around 80 and quality also and 3servers connected but still scramble
- thinking maybe is time to clean everything up did the factory reset and reload the 119 file , set up the satellite settings, scan 2 satellites channels scanned good but still no picture only the scramble and server connection okay
-try another time with no luck
- the one strange observation is that even the normally open channels like 101 is also scramble and the info or epg will never populate.

Any idea anyone? Did anybody had similar issue? Could this be a hd module?
Please help and thanks in advance.
Krawiec

[krawiec]

So I see that no one has suggestions for me on that subject.
However the final world is that my HD sk200 must be gone because when i swap it back to the original then it works but no HD ofcourse. I will order another one soon.
Have another question if someone can help - my problem occured after i added bev to my menu which bring total sats to 5 ( 2 of them HD) on the receiver which brings me to think tha power to supply to lnb might be a problem.
My question is if I could add power inserter like one fron sw44 in line before DiseqC to boost the power up or this is not going to work at all. So basically it would be power inserter next DiseqC switch next bev to sw 22 then 1 port of diseqc and next 3 lnb to other 3 ports on diseqc switch.
I hope it makes any sense and thanks everyone for suggestions.
K

[PremiereElite]

It would seems either your sats need alignment or your configuration is off, the reason you are getting scrambled channels even on open channel 101.. or you need a power inserter.. I cant offer much more because I do not have all those sats but my good friend Terryl maybe able to help you .. he is a super mod on here.. gl.

[jventur9]

I am having the same problem with the d5 hd

[jventur9]

channel 106 is working

[jventur9]

I try my spare receiver pinwheel hd iptv same problem. its not the receivers issue

[krawiec]

thanks everyone for suggestion
Like i stated above i do get everything working fine with the SD tuner in the box, so it looks like HD tuner (sk200) got fried after adding more lnbs to it.
My question still remains if the POWER INSERTER like the one from SW44 is compitable with DLHD in stand alone mode without the actual sw44.
my connection will then look like this:

-receiver to power inserter in
-power inserter out to DISEQC v1 4 port switch
-one port on diseqc will then go 22khz switch and other 3 to 3 lnb
-22khz switch to 2 bev lnb (set up 1 lnb 22khz off and 2nd lnb 22khz on)

All this in my opiniom may boost the receiver power supply to the lnb, but do not know for sure maybe someone has more knowledge in this field would correct me if wrong.
K

[scorpion11]

HI There,
It is the HD module. It usually needs to be replaced every year.
By the way for the last 2 days when i press the FAV button on remote it reboots the receiver. I am thinking it is the HD module?
Any idea any one?