IKS4SUNS help

[tubbs]

Hello

Loaded and started the IKS4 program.
Seems like it is talking to my P$ just fine, but on the nufsion, I'm getting "SUNS disconnect" and no picture.

I do have the Boot R3X 1.30 1.54.2.IPVR ).77 bin on the Nufusion. Do I need a different bin on the box? I have been useing NOI

[bhcv]

Hello
I do have the Boot R3X 1.30 1.54.2.IPVR ).77 bin on the Nufusion. Do I need a different bin on the box? I have been useing NOI
Your software is up to date. Could be the P$ be breaking the connection. Are you sure the server is up?
Do you have ":" in your DES Keys? Should be similar to below.
61:03:40:34:45:40:69:70:98:71:23:41:21:34
01:02:03:04:05:06:07:08:09:10:11:12:13:14
Have you assigned a static IP to the STB and made sure it matches IKS4SUNS?
If yes to all the above, Shut everything down then Start the modem, wait 30 seconds, start the router, wait 30 seconds start the STB wait 30 seconds, then start IKS4SUNS, The STB light should be red, The connect Green.

[tubbs]

2065920660
Your software is up to date. Could be the P$ be breaking the connection. Are you sure the server is up?
Do you have ":" in your DES Keys? Should be similar to below.
61:03:40:34:45:40:69:70:98:71:23:41:21:34
01:02:03:04:05:06:07:08:09:10:11:12:13:14
Have you assigned a static IP to the STB and made sure it matches IKS4SUNS?
If yes to all the above, Shut everything down then Start the modem, wait 30 seconds, start the router, wait 30 seconds start the STB wait 30 seconds, then start IKS4SUNS, The STB light should be red, The connect Green.

I don't understand it. NOI works, then I power down computer ans start IKS4 but no luck.
The Nfusion goes from " SUNS connected, to disconnected when I start the IKS4
see photos below..

[prchvar]

got it fixed .