Nimiq4 82 transponder?

[adamgaudreau]

What transponder should I have set to try and find nimiq 4/82 west?

[whoknows]

I'd use 428 or 12443. good luck

[adamgaudreau]

I have a IKSPS membership and put in the required info for BEV. The EPG is partially populated, DHCP info loaded, but no channels are coming in (Update the system). Am I missing something?

[whoknows]

I guess first thing is check that you p$ is up and your donation is up to date. Then reFire the router on through to receiver waiting for each to come all the way up before moving to the next. See if that helps. good luck

[adamgaudreau]

I guess first thing is check that you p$ is up and your donation is up to date. Then reFire the router on through to receiver waiting for each to come all the way up before moving to the next. See if that helps. good luck

I tried DN to make sure the setup was good, and it works with a lot of freezing, so maybe BEV is down. Can you tell me if there is a more stable non NOI bin than 5.04? One that I can just update the box and that's it.

Thanks for your help

[whoknows]

If you're Dn is working but freezing, then I would look at your p$, not the box or bin you are using. I'm just guessing but it sounds to me like a rocket/nfps problem that I read time after time. Freezing on DN and Bev down. If this is the case then you know what you have to do. Good luck

[adamgaudreau]

Then you are probably correct, sir.

[ammo]

If you're Dn is working but freezing, then I would look at your p$, not the box or bin you are using. I'm just guessing but it sounds to me like a rocket/nfps problem that I read time after time. Freezing on DN and Bev down. If this is the case then you know what you have to do. Good luck

Yes..that has been my experience with nfps with bev(not very stable)...using a jynxbox(another issue) with them for 2 months now but recently aquired a solaris for nothing and loaded it with 5.04 info for bev and everything seems ok(internet)..but get update system message..so I decided to get a linsky v8 router with ww.drt installed.. I will tackle that after new years.....now on to more reading on the goo3 files....Happy New Year to all...Cheers!