antena set up for 110 &119

[NYLA2167]

HI everybody i just got pinwheel hd mini yesterday and i download the 2.9 file alrady but dont know why i can't get the signal for this .my set up dish just use regular lnb .can anyone help please thank in advance

[Terryl]

You need two LNB's or the one DP twin LNB for 110/119, what type/brand of LNB do you have?

And what size dish is needed for your area?

The only way you can use a single satellite LNB (DP dual, standard or legacy) to get more then one satellite at a time, is with a motorized system or adding a second LNB.(or the special LNB for 118/119)

[NYLA2167]

i have 2 standard lnbs and a dish with 3 lnbs 101 110 119 and it digiwaw.thank

[Terryl]

You can't use the LNB for 101 but the LNB's for 110 and 119 should work fine, have you gone to dishpointer.com and looked up the pointing info for that dish?

Also what type of Diseqc switch are you using?

And can you post your receivers settings for 1120 and 119.

[NYLA2167]

Echo 14 119 .tuner 1. Lnb type .ku .frequency 11250 .tp 12239/h21500. Disqc =none .disq=none .legacy=none

[whoknows]

You have the tp frequency on an hd tp which is ok if you have a lock on satellite. Lock means it says 119 west at the top of antenna page. The default tp frequency is 12253 and that is the tp you use to confirm you are on satellite....Now if you are have more than one l n b then change satellite to 110 and change the disq parameter slowly (a b c or d) until 110 pops up at top of page. You have to tell the antenna setup what port 119 and or 110 is on(switch port) and you do this by changing disq parameter. hope this helps.