how to change the clutch on whirpool washer

[carlin]

ey i have a whirpool washer that is not spining i check the motor and the trasmition and both working wen i put it to any sicle or spin it hust do nothing so i asume is the clutch and i dont know how to changed. ani advice its apreciated. thanks in advance:no:

[LoginFreak]

ey i have a whirpool washer that is not spining i check the motor and the trasmition and both working wen i put it to any sicle or spin it hust do nothing so i asume is the clutch and i dont know how to changed. ani advice its apreciated. thanks in advance:no:

Is the washer still agitating?

If you look at this thread:
http://www.satfix.net/showthread.php?t=936
And go to the 2nd post. You will see a part called the coupling.

The first thing to do would be to fill the washer and lift the lid after it's done filling. There should be a place where the lid has a pin that pushes down on something. That is a lid switch and you might have to push it down with a pen to get the washer going.
Some models go through the agitation without the lid switch but others don't.

If you have any questions let us know.

[ob111]

The first thing to do would be to fill the washer and lift the lid after it's done filling. There should be a place where the lid has a pin that pushes down on something. That is a lid switch and you might have to push it down with a pen to get the washer going.
Some models go through the agitation without the lid switch but others don't.

If you have any questions let us know.

some have a magnetic switch