Unknown Network on Sat Settings

[lionking]

Is there anything I can do about Unknown Network on Sat Settings after I loaded newest bin into there? I get this on most Sat 119,110,129.... and it will not scan even if I load the proper channels name list. Thanks in advance.

[Fta-Technology]

what bin you installed it?

[lionking]

what bin you installed it?


Dreamlink_T5_0010_0910_factory.bin and Dreamlink_T5_0102_1028P.bin and did a system recovery between each one then I loaded dl-t5-proper-channel-names-221013.HDB and turned power off then on. The problem is because it uses different bin extensions then the original Dreamlink HD I cannot save the settings including channels, sats and network settings from Version 1 or 2.

[A365]

Re-seat your HD Module

Open the unit and press down the HD Module then place back the black sponge/heatsink cube on top of the HD Module and close your unit

Unit needs to be unplug from power

[lionking]

Re-seat your HD Module

Open the unit and press down the HD Module then place back the black sponge/heatsink cube on top of the HD Module and close your unit

Unit needs to be unplug from power

Yes thanks I have tried that unplugged and it still gave me in sat settings unknown network for all sats. Maybe some other circuitry is damaged in the unit. Am I also supposed to Re-seat the HD Module after opening it by unscrewing where it is screwed into the press down on it then re screw it back then place back the black sponge/heatsink cube on top of the HD Module and close the unit because I only pressed down on the HD Module and then place back the black sponge/heatsink cube on top of the HD Module?

[lionking]

Yes thanks I have tried that unplugged and it still gave me in sat settings unknown network for all sats. Maybe some other circuitry is damaged in the unit. Am I also supposed to Re-seat the HD Module after opening it by unscrewing where it is screwed into the press down on it then re screw it back then place back the black sponge/heatsink cube on top of the HD Module and close the unit because I only pressed down on the HD Module and then place back the black sponge/heatsink cube on top of the HD Module?

BUMP Mods please reply back. Thanks in advance.

[tito2020]

Why load the factory file does it come with it already?

[KIDWCKED]

if its sitting firmly in place i dont think removing it and re installing will help..the unknown network showing in top right indicates a bad mod...u can remove very carefully and re install...jus to make sure...but imho i think u shud get another module....

[lionking]

if its sitting firmly in place i dont think removing it and re installing will help..the unknown network showing in top right indicates a bad mod...u can remove very carefully and re install...jus to make sure...but imho i think u shud get another module....

Dreamlink HD T5 returned for exchange to seller. Delivered today but seller was not there has to pick unit up at Post Office.

Update: Unit was picked up at the Post Office and I received it back and working as good as ever with the picture, scanning, and how quick it changes from channel to channel and even from Satellite to other Satellite for channels. It was the 8PSK Board and was replaced with one that is not defective with very FAST SERVICE. I am very impressed now.

[KIDWCKED]

Dreamlink HD T5 returned for exchange to seller. Delivered today but seller was not there has to pick unit up at Post Office.

Update: Unit was picked up at the Post Office and I received it back and working as good as ever with the picture, scanning, and how quick it changes from channel to channel and even from Satellite to other Satellite for channels. It was the 8PSK Board and was replaced with one that is not defective with very FAST SERVICE. I am very impressed now.

nice!!!....;D