View Full Version : Dish pole ideas
keegster17
11-08-2013, 07:41 PM
guys I need to come up with a dish pole to come out from the house wall up and around the eaves of the house, any ideas? the eaves I assume sticks out about 2.5 ft, I probably need to go about 3 or 4 feet. the less holes in the side of the house the better. my only option, no other place to add it.
Benney
11-08-2013, 08:39 PM
Can't you mount the pole in the yard?
Benney
11-08-2013, 08:41 PM
This might give you some ideas.
https://www.google.ca/search?q=wall+brackets+to+mount+a+dish+pole&client=firefox-a&hs=elZ&rls=org.mozilla:en-US:official&tbm=isch&tbo=u&source=univ&sa=X&ei=Nkx9UrjgK4yzsAT_-IHoDA&ved=0CEAQsAQ&biw=1245&bih=594
keegster17
11-08-2013, 08:59 PM
to many obstructions, but thanks.
Terryl
11-09-2013, 03:05 AM
Try one of these puppys....
http://www.hometech.com/hts/products/video/satellite/mounts/gc-sateve.html?key=A27&pk_kwd=GC-SATEVE158&item=GC-SATEVE158&gclid=CPzPtp3c1roCFcw9QgodgRUAqA
Ineedanewusersname
11-09-2013, 11:52 PM
I used a "cyclone" galvanized fence for my neighbor; ~ 1 & 3/4" dia. by 8 ft.
DualTest
11-10-2013, 12:04 AM
I used a "cyclone" galvanized fence for my neighbor; ~ 1 & 3/4" dia. by 8 ft.
I use the same thing. Didn't need the whole 8 feet so cut it down with a hacksaw.
keegster17
11-14-2013, 02:43 PM
guys I have to clear 15" of eaves if not more, So i need like a "L" shape bracket. then I have to go high enough to have a 18" dish clear the roof, I have made my own 18" dish with motor, works well, but looking for the cheapest way to make a bracket to hold in place. will one of those dish poles extended 39" clear on a angle of my eaves, and then possibly add a galvanized pole to extend the height to clear the roof for the dish?
Terryl
11-14-2013, 06:53 PM
Did you look at the one I posted???
It will clear the eaves, but if your going to extend it you will have to brace it back to the roof to stabilize it for the motor.
This is what I use.
20106
keegster17
11-14-2013, 07:17 PM
I did Terryl, they want about $50 for that one in Canada, a bit pricey, thinking of making my own. Maybe buy a Dish pole extension 39" and slip on a piece of pipe with a coupling or something for the height. It is just a 18" dish motorized so not to heavy.
1boxman
11-14-2013, 07:23 PM
You get a antenna pole...most people are throwing them out . Remember if it is just a pole..the higher you go ..with a thinner type pole..you will get sway .
Or go with a roof mount type .Tripode . These are easy to make .
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.