make2dream hd ?

[buzat]

Hey you all,
I messed up in loading the make2dream files,i loaded the files don't know what stupid thing i did but i know you experts will guide me,after everything i now have 2 different iks names in server 1 and 2,i reset receiver enter my iks info in servers 1 and 2 but cannot connect,i did a hard boot went back into servers and the info i put in is not there but the info of the 2 servers i tried to overwrite came back.I turned off servers 1 and2 and put info in server 3 BAM it worked but how do i delete iks in servers 1 and 2 permanently so i can use those servers and last thing about make2dream should i skip server 0 or change it to 1 and server ON=O should i leave as is?
Thanks

[A365]

Load Factory Bin File = DL_HDpvr_factory_106

Do a Factory Reset

Load Latest Bin File = DL_HDpvr_119

Then open M2D and follow this:
a) put all server info in SERVER.txt (open the text file and modify the info for your server 0 and server1)
b) run make2dream_hd.bat

load CHLIST-S.LDB to receiver with usb stick (transfer the LDB file to your usb dongle and load the file in to your receiver)

[SERVER-xx
USER-NAME= xxxxxxxx
USER-PASS= xxxxxxxxx
SERVER-NAME= xxxxxxxxxx
SERVER-ON=xxx
PORT= xxxxxxx
DESKEY=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


Server 0 is your first server

Server 1 is your second server

More than 3 servers in the LDB file and you star to get pixelation problems


Good luck

[buzat]

Thanks, very helpful info i will follow your guidance, but what do i do with SERVER-ON=?

[dishuser]

Thanks, very helpful info i will follow your guidance, but what do i do with SERVER-ON=?

it don't matter
you can turn it on/off in server menu

[CF-47]

Thanks, very helpful info i will follow your guidance, but what do i do with SERVER-ON=?

0 (Zero) is off
1 (One) is on