xxcutive
09-22-2013, 12:06 AM
I have a Dish HD for 110 119 129 and Dish 1000 with either Dish Pro Twin LNB or Twin Legacy because the housing broken set up with DPP 44 and power inserter and a SW 21 but have problem. Its work greats on DN channel but have problem set up with Bev. Some saying DN dont work well with SW 21 and recommend Ecoda 22 KHZ switch and also dont need the DDP 44. Setting should be like this
Connect the coaxial cable from Dish HD LNB to one of the Ecoda 22 KHZ.
Connect the coaxial cable from Dish 1000 LNB to the other side of the Ecoda 22 KHZ and out to receiver. This mean no DDP 44 and power inserter because these LNB have a built in switch as long as the setting are correct.
So I dont know which is the correct way if not killing the receiver power supply. BTW this is only using Jynx
Connect the coaxial cable from Dish HD LNB to one of the Ecoda 22 KHZ.
Connect the coaxial cable from Dish 1000 LNB to the other side of the Ecoda 22 KHZ and out to receiver. This mean no DDP 44 and power inserter because these LNB have a built in switch as long as the setting are correct.
So I dont know which is the correct way if not killing the receiver power supply. BTW this is only using Jynx