Can not find SAT

[bebe55]

Hi all, I got a new Dreamlink SD HDMi. when I do dish settings I can't find sat 110 119 or 129 . What can I do please
help.I have VIEWSAT I use that setting.when i got dreamlink ican't find 110 119 or 129 sat thank you

[runamok]

Did you factory default receiver after loading latest file?Sat 129 is no good for sd receiver.

[Terryl]

The Dreamlink SD is not an HD receiver, so why would you need 129W??

And the receiver is setup to the correct settings and satellites???

What type(s) of LNB(s) (and switch if used) do you have?

[future]

Can you please post all of your hardware setting and if any switch involved between and what kind of switch and the way you have it hooked up together but also the way you have the setting in your receiver setting so we can get a better picture and to be able to give a more precise advice.

[future]

Terry I got the impression he meant that his receiver is an HD but it works on the sd side as well which is ok, but always I could be mistaken.

[Terryl]

The Dreamlink SD uses an HDMI cable but it is not an HD capable receiver, thus the SD designation, it could be a DC current problem if he is trying to use one of the Dish 1000 LNB's, we need more info from him.

[bebe55]

Hi runmok yes i load file 208 11.10.12. I mean when I do dish setting I don't see Echosat sat. I see some difference sat .
I know my dreamlink is sd not hd but i wander can't see sat list





Did you factory default receiver after loading latest file?Sat 129 is no good for sd receiver.

[bebe55]

HI TERRYl I know mine is not HD But i can't find Echos tar sat list
When i use my old viewsat 9000 i set up stand a switch 4+1








The Dreamlink SD is not an HD receiver, so why would you need 129W??



And the receiver is setup to the correct settings and satellites???

What type(s) of LNB(s) (and switch if used) do you have?

[Terryl]

Do you mean that sats 110 119 and 129 are not listed in the sat setup menu???

What ones are there???

[runamok]

Hi runmok yes i load file 208 11.10.12. I mean when I do dish setting I don't see Echosat sat. I see some difference sat .
I know my dreamlink is sd not hd but i wander can't see sat list

I asked you if you did a factory default after loading file.If not do a factory default now and sats will appear in sat list.

[horney toad]

I asked you if you did a factory default after loading file.If not do a factory default now and sats will appear in sat list. had this problem with my sd also.......do a factory default a couple of times and reload the files and you should be good to go again (make sure you do a factory default after each file is loaded) .........you will have to reload your sats again but the Dl should be healed.......hope this helps.......cheers....HT