Duplicate Channels after scan

[RMAC11]

Hello to All, I'm getting duplicate channels after scan mainly on sat 129 on my viewsat 9000HD. In the guide for example: channel 9456 will give info about whats on,& the 2nd 9456 will say " NO INFORMATION "Is there anything I can do about it ?

Thanks :frusty:

[bruinfan]

Rescan but do it this way:
C/P

SpotBeam Scan.....

In antenna setup turn lnb power off to all sats except the one you wish to scan, then go to channel scan section in menu, make sure network is on. Select the sat you want to scan, go down to search edit t/p... hit ok this will highlight one of the t/p's...scroll down to the first t/p with quality, delete all other t/p's...each sat like I said is done separately. (delete is F3 button on remote)... after deleting all t/p's minus the spot beam transponder hit ok. This will search for all t/p's and ch on that sat... after done scanning save.... do this for all the sats you want to scan .... Remember to turn lnb power back ON in antenna setup for all the sats, after you are done scanning. Every few weeks I'll scan but don't always turn off the other LNB's and works just as good.