SKS Configuration Guide for AZ S&S HD

[platon]

SKS Configuration Guide for AZ S&S HD

1.- Upgrade software by USB:
Open "Upgrade" menu -->select "Upgrade by USB"--> select Upgrade Mode "Firmware"--> select Upgrade File "AZ S&S HD.abs"-->press "Start"-->"Are you sure to burn the flash?", select "Yes" to start the upgrade. After upgrade, the receiver will restart. During the upgrade period, please don't take out the pendrive, otherwise the receiver will be damaged.

2. - Configuration for SKS:
Open the main menu-->press "2580" on remote control-->a hidden menu "Plug In" will appear-->set "SDS "on" and "apply", meanwhile set other modes (IKS,TWIN,SSSP,etc) off


3. - Antenna setup:
a). Open menu "Installation"-->select "Satellite List"-->press F2 on remote control-->select Connection Type: Dual(Different), LNB1: Fixed Antenna, LNB2: Fixed Antenna, LNB Power: On-->exit

b). In the menu of "Satellite List"-->select LNB1: Amazonas, LNB2: Hispasat.

c). Press "menu" on the remote control back to the menu "Installation"-->select "Search", set the correct data for LNB1(Amazonas) and LNB2(Hispasat)
d). Search LNB1: press F1 to do "Single Search"-->select Scan Mode: "Preset Scan"-->press "Search",


5.- Enjoy your favorite channels.


*** Press "menu" on the remote control, it always goes back to the upper menu.
:D

[iq180]

what azbox is this for?

[Dish expert]

Its a receiver brand

[iq180]

Its a receiver brand
Hmmmmm, so you think its a receiver brand, I did not know that,LOL.

[Dish expert]

Hmmmmm, so you think its a receiver brand, I did not know that,LOL. yes, it is use mostly in south america

[iq180]

yes, it is use mostly in south america
yes I know this but some members here mite not and if you look at the end of post 4 you will see {LOL} now back to post 2, this
was the answer I was looking for from platon, azbox Bravisssimo S&S HD, I only wanted him to edit the post and add the info,LOL.

[platon]

hi friend....
sorry for my delay iq180.
this is the new receiver that sustitute azbox bravissimo.
AZ S&S HD