platon
08-07-2013, 04:34 PM
IKS Configuration Guide for AZ S&S HD
1.Connect the receiver with internet
Connect the receiver with internet by ethernet port or by WIFI
2.Set "IKS" On
Open the main menu-->press "2580" on remote control-->a hidden menu "Plug In" will appear-->set "IKS" On
3. Input your pin code (please get the pin code from your dealer, one pin code for one receiver)
Select IKS on and press "OK"->input your pin code, e.g. 10-123456-123456-12345,it means your pin code is 010-123456-123456-12345. The pin code must be 20 digits:01012345612345612345. Otherwise it will not work for IKS. (Press red button "DEL" to delete the old digits). After inputting the pin code, press "OK".
4. Active your pin code
Press "Apply" and then exit and wait for about 50 seconds and you can see the start date and end date is changed.
5. Enjoy your favorite channels
Notes:
1) After upgrade the bin file, it needs to input the pin code and then the IKS can work.
2) One pin code is for one receiver. If two receivers use one same pin code, the server will stop for this pin code.
3) Please keep the pin code safely.
4) Don't mind the "end date" of IKS. After the end date, the IKS will continue to work freely. It is just for killing clone receivers.
5) Please don't do "factory reset" or upgrade by "total flash" mode after inputting the pin code. Otherwise the pin code will be erased.
hope it helps anyone....:D
1.Connect the receiver with internet
Connect the receiver with internet by ethernet port or by WIFI
2.Set "IKS" On
Open the main menu-->press "2580" on remote control-->a hidden menu "Plug In" will appear-->set "IKS" On
3. Input your pin code (please get the pin code from your dealer, one pin code for one receiver)
Select IKS on and press "OK"->input your pin code, e.g. 10-123456-123456-12345,it means your pin code is 010-123456-123456-12345. The pin code must be 20 digits:01012345612345612345. Otherwise it will not work for IKS. (Press red button "DEL" to delete the old digits). After inputting the pin code, press "OK".
4. Active your pin code
Press "Apply" and then exit and wait for about 50 seconds and you can see the start date and end date is changed.
5. Enjoy your favorite channels
Notes:
1) After upgrade the bin file, it needs to input the pin code and then the IKS can work.
2) One pin code is for one receiver. If two receivers use one same pin code, the server will stop for this pin code.
3) Please keep the pin code safely.
4) Don't mind the "end date" of IKS. After the end date, the IKS will continue to work freely. It is just for killing clone receivers.
5) Please don't do "factory reset" or upgrade by "total flash" mode after inputting the pin code. Otherwise the pin code will be erased.
hope it helps anyone....:D