loading files?

[gino_1983]

hey guys just picked up a solaris brought it home and discovered it didn't have a usb port and I don't have a serial port (rs-232C) any other way to load files?

[Glatt]

On the internet type in the box IP The ID is admin and password is 0000 then load program!

[gino_1983]

ok I will try that tomorrow so I plug it in and type in id and password but how do I load the program? im new to this receiver sorry

[gino_1983]

hey I figured it out couldn't wait what file should I use

[StanW]

On the internet type in the box IP The ID is admin and password is 0000 then load program!
DO not use the webloader to load 3rd party files - you will brick the receiver. Use the serial loader - look in the nf files forum.

[gino_1983]

I don't have a serial port in my computer and everyone I ask doesn't either

[StanW]

Ppl use usb to serial adapters.

[gino_1983]

Ok never knew they had those thanks

[ankushk]

gino_1983
Make sure that the RS-232 cable connecting to the receiver is NULL and not straight.

[gino_1983]

Ok will do thanks

[gino_1983]

What is the bin file i need to use ?

[StanW]

What is the bin file i need to use ?
That will all depend on the method that you have selected to use to test iks - there are at least four options.

[gino_1983]

im gonna use the null cable to the receiver I just waned the easies method that will work? you have any simple ways this receiver seems more complicated than my nanosat that was a piece of cake

[StanW]

No comparison between the nanosat and nf. nanosat was designed to work with 3rd party servers, nf expired prior to (more or less ) ppl offering/targeting multiple receivers. There are several ways to getting your nf working again - you will have to decide which one suits your needs the best. Time to put on the reading glasses - or wait to be spoon fed.

[gino_1983]

ya just wanna get it working with a paid server

[StanW]

ya just wanna get it working with a paid server
..... so you're opting for spoon feeding? - good luck ;)

[gino_1983]

so I downloaded both the loader and the noi whats the easier way

[gino_1983]

ya help would be nice friend

[StanW]

ya help would be nice friend

Seeing that you're asking so nicely ; the place to do find all the answers to all your questions would be here :

NFusion Common Discussions (http://www.satfix.net/forumdisplay.php?1389-NFusion-Common-Discussions)

[gino_1983]

thank you just don't wanna get sub and waste all the time and money and not have it work

[StanW]

There are many ways to skin a cat . Getting the receiver going requires hardware/software. We have no idea of where you stand in both areas - doing a bit of reading will get you a good idea of what's available. Someone will probably come along and recommend that you load files that they feel are best - that is not necessarily what will work for you and it might end up costing you money.

[gino_1983]

thanks for the link but I am still confused so if I just run the newest bin 5.02 isn't that enough I don't understand that noi having to leave the computer on and the other program it talks about changing ips and all that so the newest bin isn't enough
?

[StanW]

I have't been keeping track on recent nfusion developments but the options available to you are (please don't quote me on this) ; NOI - this requires the use of a pc ( with the appropriate software of course) running when using your receiver, stand alone files - which there are several options ( some server related) available (one that you have to pay for - or not if you have a hacked version) and the latest arrival on the scene goofathers files which require your router (see compatability lists) to be flashed with the appropriate software.
To sumorize - noi /3rd party(multiple options)/goo - obviously each option requires multiple files to be loaded to the receiver/pc/router.

[gino_1983]

ya ive been reading the one which you have to load the boot loader than the bin file I don't see where to get the boot file my wireless router I rent from the provider so don't wanna mess around with it I know I have to pay for the iks and but theres another server I need to pay for Im not to familiar with this noi

[StanW]

Regardless of method you decide on to test you have to donate to a iks service . All of the options , with the exception of brians bin , are free - all files are available for download in the nf files forums.
Your current dsl modem/router probably will not work with goos files and as you indicated you do not want to mess around with rented equipment. A compatible router can be had for $20-30 on fleabay . Tit can be connected to you current modem.

[gino_1983]

ok thanks I think I will try them all first I will try whats in the link you put up with loading the bootloaded and the newest bin if cant get that wil try noi and if that fails will have to get a router and hook it up I wont brink the receiver by trying all these will I

[gino_1983]

I just checked my room and I found a belkin N300 wireless N router would this work?

[dishuser]

I just checked my room and I found a belkin N300 wireless N router would this work?
http://www.dd-wrt.ca/wiki/index.php/Supported_Devices#Belkin

[gino_1983]

so guess that would be no don't see n300

[Glatt]

N300 will work!

[StanW]

N300 will work!
How do you know that ?

[gino_1983]

N300 will work!

I don't see the n300 Posted

[velocity9421]

it's not listed as supported by either dd-wrt or openwrt

so it won't work, and i wouldn't risk flashing it


N300 will work!

[velocity9421]

is this your router?

Belkin F7D7301 v1

hXXp://www.ebay.com/itm/Belkin-N300-300-Mbps-4-Port-Gigabit-Wireless-N-Router-F7D7301-/171084787872?pt=COMP_EN_Routers&hash=item27d572b0a0

I don't see the n300 Posted

[dishuser]

it's not listed as supported by either dd-wrt or openwrt

so it won't work, and i wouldn't risk flashing itnot listed?check again

[velocity9421]

dude didn't list his entire router model number. turns out it is supported but does it have room on the router to load the xx-client files?

Belkin N300 300 Mbps 4-Port Gigabit Wireless N Router (F7D7301)


not listed?check again

[gino_1983]

Sorry no good at this stuff just seen the model # on the box
dude didn't list his entire router model number. turns out it is supported but does it have room on the router to load the xx-client files?

Belkin N300 300 Mbps 4-Port Gigabit Wireless N Router (F7D7301)

[ChillyWilly]

dude didn't list his entire router model number. turns out it is supported but does it have room on the router to load the xx-client files?

Belkin N300 300 Mbps 4-Port Gigabit Wireless N Router (F7D7301)

It has a 4mb flash and a broadcom chipset, so in theory it should work with goo2/3. However goo is based upon a micro (2mb) bin. The micro bin is not listed as an option for this router at dd wrt, however this may be because most people would rather load a mini bin to a 4mb router. I'm betting goo 2 or 3 will work, but there is a risk of bricking it. Of course most people are buying used wrt54g series routers for about $10, so ...........

[gino_1983]

Ya think I will first try the noi method see if and how that works if not I'll look for a used router