No stop freezing, can someone help??

[satjunky]

I have freezing every 10 seconds or so on 110 and 119. I have used 1.05 and 9.15 and have reset the server info.

I have been reading that others are OK any suggestions ??

thanks in advanced...

[Glatt]

A good signal strength helps out and reboot your router also!

[Bonzo]

I am using 108 and 915 with no glitch or freezing.
Running with rocket.
The ip changed maybe that has something to do with it or a hard reboot or factory default.
Hope this helps.

[hutch]

usually a hard reboot... (throw the switch on the back) can help also reboot your router & wireless if applicable

[Troyblack]

Trying runnin it on "stream and dream" in your net application

[satjunky]

I'm using 6.nfpsserver.tv did this change?

[satjunky]

My signal strength is 95 % and I have rebooted my router?

[torpainter]

I'm using 6.nfpsserver.tv did this change?

you need to check the nfps forum for any info regarding the server

[nuttybuddy420]

you need to check the nfps forum for any info regarding the server

yes freezing starts real bad any where from 7pm -8pm and doesn't stop all night

[cruel2765]

Try using another port I'm using 30110

[mechanicman]

The nano has serious freezing issues.. if you had another receiver to see if it is server/ port issues or this sucky box..

[torpainter]

The nano has serious freezing issues.. if you had another receiver to see if it is server/ port issues or this sucky box..

the premium runs fine ,the se has issues

[Bonzo]

Not so sure about that Torpainter.

[jaybird1]

no problems running mine freeze free!!

[torpainter]

Not so sure about that Torpainter.

my brother has been running no issues since it came out.

[Mavrick]

I think it depends on which PS you are using with the Nano-Prem, The NFPS service changed something recently causing massive freeing on the Nano, I had to change back to the 1.05 file to make it watchable again. The one downside to using the 1.05 file is there is a micro-freeze/glitch every 20 seconds or-so. If anyone knows how to get rid of the micro-freeze with the 1.05 file please post it in this thread.

[hutch]

yep that's about right, annoying but watchable... I waited a week but couldn't stand the freezing so switched from 1.12 back to 1.05

[bad1]

Will any other file work eg.1.08,1.09

[Papacito62]

I think it depends on which PS you are using with the Nano-Prem, The NFPS service changed something recently causing massive freeing on the Nano, I had to change back to the 1.05 file to make it watchable again. The one downside to using the 1.05 file is there is a micro-freeze/glitch every 20 seconds or-so. If anyone knows how to get rid of the micro-freeze with the 1.05 file please post it in this thread.

Maverick ..... Never mind my PM it is 1.05 that I am using not 1.08...... Micro freeze haven't been that bad lately.

Papa

[skinnerboy45]

I read this on another site to use 104 it was poasted as new file so maybe try it posted on 18 of this month good luck

[mars25]

my brother has been running no issues since it came out.

what file now 1.05?

[steiner01]

hEY Everyone

mine hasn't stopped freezing in a month . its brutal
heres my info.

type ; dream
server;1
softcam;newcamd
input type; domain
server;3.ROCKETSERVER.TV
port; 35933
au;on

sky1.12 ldr 1.08

tried everything , rebooting , unplugging receiver . Its unwatchable .

any suggestions?? greatly appreciated ...

[alvirgieca]

load the older bin like 1.04 or 1.05 as they say it is less freezing.

[steiner01]

load the older bin like 1.04 0r 1.05 it works less freezing.

Thanks alvirgieca , Ill try right now....

[steiner01]

load the older bin like 1.04 0r 1.05 it works less freezing.

I loaded 1.04 brutal freezing .

now im trying 1.05 I loaded it as a sw+all data upgrade . Is that right ? haven't done this in a long time....

[whoknows]

I loaded 1.04 brutal freezing .

now im trying 1.05 I loaded it as a sw+all data upgrade . Is that right ? haven't done this in a long time....

You can try every bin or box known to man, but until you change p$ you got what you paid for...good luck

[steiner01]

You can try every bin or box known to man, but until you change p$ you got what you paid for...good luck

Your probabaly right . I never had this Freezing problem so bad with Rockets last year 2012 . But this year , especially the last month , its been unwatchable .

I have loaded sky 1.12 ldr 1.05 well see what happens tonight when I watch Raw ....

[zoogor]

You can try every bin or box known to man, but until you change p$ you got what you paid for...good luck

thats the answer right there. like it or not

[Bonzo]

So what would you suggest Zoogor?

[redrocker]

Better ps.. smooth

[vic24551]

Better ps.. smooth
I had the same issues as you! changed to previous updates & servers, not good! the only thing which is
presently working is not to used server 1 and dream only.;)

[alvirgieca]

load the older bin and then set ur IP set up to manual and click it exit out that will minimize ur freezing.

[Nostradamus]

You can try every bin or box known to man, but until you change p$ you got what you paid for...good luck


thats the answer right there. like it or not

that is the biggest part of the equation and then a box that wouldn't require posting in this section

[Papacito62]

I have 2 different boxes one SV is freeze free the other Nano is micro freezes both on the same p$, so it has to be the box and file on the box, if you put 1.05 on it..... Watchable with a picsulation now and then.

Papa

[steiner01]

I loaded1.05 somewhat better ,but still many micro freezes

[Papacito62]

Depends on what channel you are watching.....some picsulate more than others and some freeze every 15 min, think its a bad weekend.

[hutch]

c/p freeze fix

ultimate Nano se freeze fix

I took menahanna recommendations on updating firmware to
factory file 7.04 then Sky 3.06.
I was still getting freezing on certain channels.. I decided to use IP instead of domain on server 1. left other servers blank.. and then went to IP setup and put it on manual instead of auto.. clicked apply, waited a few seconds then exit ,,

seems to have completely eliminated freezing on my nano and server.

[Papacito62]

Lol..... Or the freezing has stopped, been freeze free for the last 4 hours or so. But I wish all the best for a freeze free sat experience .

[Mavrick]

To all that still have a freezing issue with the Premium (and NFPS).........
I switched back to an older file (1.05) but still had micro-freezing every 15 seconds (which drove me nuts) but when I also switched my DNS settings it stop almost all the freezing. In the network settings switch it to Manual and change your DNS settings to 8.8.8.8 and the alt DNS to 8.8.4.4

I had seen this DNS advise somewhere before but never bothered to try it, boy I wish I did sooner as it worked great for fixing the freezing on my Premium.

[plastikman]

is there a way to convert these over to an ilink.. I am sick of the freezing, and tried everything as was said.. The next thing i am going to try is converting it to an ilink 210, if that dont work its going in the trash... period..