nfusion solairs

[Adamo]

hi can i use any D-Link for XX-Client 2.5 . Thank you

[StanW]

hi can i use any D-Link for XX-Client 2.5 . Thank you
Depends on the model/version of your router.

[Adamo]

What do you mean I am not good at this are you talking about the one I am useing at home

[Adamo]

I have this at home
Bell 2Wire 2701Hg G Modem Router

[StanW]

I have this at home
Bell 2Wire 2701Hg G Modem Router
What does that to do with the dlink that you're inquiring about?

[Adamo]

Okay or I just go to bestbuy and get a d- link
Thanks for your help I was saying I have bell at home am I okay to connect a d- link to it

[StanW]

The 2wire router installed by bell does not have wifi capabilities, make sure that the router that you purchase meets xx client requirements.


edit : above is incorrect - suffering from severe foot-in-moth syndrome at the present. lol

Sorry for any confusion I might have caused.

[dishuser]

The 2wire router installed by bell does not have wifi capabilities, make sure that the router that you purchase meets xx client requirements.

yes it does
it will allow 10 wireless and 4 wired connections

[StanW]

yes it does
it will allow 10 wireless and 4 wired connections

Correct - confused it with another router I was using .

[Adamo]

Thank you guys for your help I am going tomorrow to pick up the d-link hope I pick the right one

[goofather]

Thank you guys for your help I am going tomorrow to pick up the d-link hope I pick the right one

DO NOT ATTEMPT TO LOAD THE DD-WR-GOO BIN ON ANY D-LINK ROUTER

You will have to do a manual install, providing the router can run 3rd party firmware (i.e. OpenWRT, DD-WRT, Gargoyle, Tomato, etc).

I just thought it deserved mention and in CAPS because I have seen a couple people attempt this and brick their router. Most d-link routers are Atheros based that is the first strike against it when determining if the goo bin will work. The goo bin is for broadcom based routers, more specifically, WRT54g's......

[Styx_N_Stones]

Read up on DD-wrt first... if you cant get past those instructions go a different rout...

[ChillyWilly]

DO NOT ATTEMPT TO LOAD THE DD-WR-GOO BIN ON ANY D-LINK ROUTER

You will have to do a manual install, providing the router can run 3rd party firmware (i.e. OpenWRT, DD-WRT, Gargoyle, Tomato, etc).

I just thought it deserved mention and in CAPS because I have seen a couple people attempt this and brick their router. Most d-link routers are Atheros based that is the first strike against it when determining if the goo bin will work. The goo bin is for broadcom based routers, more specifically, WRT54g's......

Also works with wrt54gs, wrt54g2, wrt54gs2........and I keep seeing these for $10 on ebay

[Adamo]

Thank you guys The best bet is wrt54gs