colours bleeding on solaris

[hellbent1]

Hello, converted back from brian's bin 6.1,
1. factory default
2. boot 1.30
3. u17 also in boot mode, also tried u48 in boot mode.
4. 153 main mode
5. 154-2 (255) main mode
up and running, all sats, but now faces are almost smudged out, colours out of balance. Tried on 2 different tvs and my projector same results on all. adjusted picture settings.
Although the guide and menu are unaffected by colour problems; and cartoons aren't too bad.
Any thoughts?
Thanks,

Hellbent1

[MaFiA]

What about checking the video cables?..or maybe factory defalt..and redo the files load..make sure you factory reset after loading all files

[StanW]

Hello, converted back from brian's bin 6.1,
1. factory default
2. boot 1.30
3. u17 also in boot mode, also tried u48 in boot mode.
4. 153 main mode
5. 154-2 (255) main mode
up and running, all sats, but now faces are almost smudged out, colours out of balance. Tried on 2 different tvs and my projector same results on all. adjusted picture settings.
Although the guide and menu are unaffected by colour problems; and cartoons aren't too bad.
Any thoughts?
Thanks,

Hellbent1
Known problem when converting back from brians bin - do the following : load v130 than u17 --> hit sat button --> hilite custom arrow over (change to standard) , load 154

[hellbent1]

Thank you so very much, had me very concerned!! You are a Super Moderator!!


Hellbent1