sonicview 4000

[pima60]

trying to load my new files on my sonic 4000, its been years since its been running, but now that i got my code my reciever is stuck on E or 0. its wants to boot but its stuck, what do i do to get into usb to add new files?

[steven charles]

friend try loading the sonicview4000 factory file with the rs232 cables it should help fix the problem is the factory file that was posted 12-24-2012,the file is in the sonicview4000 file section,good luck friend....

[adamgaudreau]

friend try loading the sonicview4000 factory file with the rs232 cables it should help fix the problem is the factory file that was posted 12-24-2012,the file is in the sonicview4000 file section,good luck friend....

Thanks for the help, I now have new problems and was hoping I could use you as a go to guide. Step 4 in this guide, where do I find IP config on an sv4000? My menu has installation, system settings, Entertainment, and Smart Card. Smart Card just says smart card: none and wont do anything else.

Sonicview Set Up For NFPS
How to get your SonicView Working with IKS Private Server

1. Load the latest bin released by the Super IKS Team.
2. Do a factory reset.
3. Scan channels.
4. Click on Menu > Ipconfig > Change Private Server to "yes".
5. In Use DNS – Change to "yes". Server "domain name" will then come up.
6. In Server domain name, type in the domain name sent to you with your access code.
Note: To be able to enter decimal points, you need to have lower case selected.
7. Change port number to the one that was sent to you with your access code.
8. In User Name, click "ok" and a keyboard will appear on screen. Type the code that was sent to you.
9. In Password, type your access code again.
10. DES key, enter the code that was sent to you with your access code.
11. Press exit and yes to save the info.
(6) & (7) Port & Server Name Updates Here
Files located in associated files sections,