can't find HD channels on 119

[ssr316]

I just did a factory default on my box and after rescanning I can't get the HD channels on 119. There's only a handful, but it'd be nice to have them. I believe espn hd (9424), tnt hd (9320) are two of those that are missing. Also, I can't seem to find it on lyngsat. It should be under TP 12311 according to what I've read.

Can someone help out?

Thanks.

[Anubis]

Most HD channels are on sat 129 with the exception of a few on 110 and 119. I would check provider site to see where they are nowadays with all the moving they have been doing.

[Terryl]

The channels in HD on 119 TP12311 are in the low to mid 100's as far as channel number go, a few exceptions are WGN (239), fox sports (5408, 5420) and NHL center ice (9547).

[torpainter]

http://www.lyngsat.com/packages/dish119_sid.htmlhd are in green

[ssr316]

Thanks for your responses.

ESPN on ch. 140, while it does work, is not in HD. I can't seem to get any signal quality for TP 12311 but I do for other TPs on 119.

Also, ESPN is supposed to be on 9424. I don't see that anywhere on lyngsat. I'm pretty sure it should still be there as I was watching just two days ago before I did the factory default.

Is there a new TP file for the nfusion that I may be missing? Something that has come out within the last year or so? ESPN hd used to be on sat 110 last time I installed a TP file.

[dishuser]

Thanks for your responses.

ESPN on ch. 140, while it does work, is not in HD. I can't seem to get any signal quality for TP 12311 but I do for other TPs on 119.

Also, ESPN is supposed to be on 9424. I don't see that anywhere on lyngsat. I'm pretty sure it should still be there as I was watching just two days ago before I did the factory default.

Is there a new TP file for the nfusion that I may be missing? Something that has come out within the last year or so? ESPN hd used to be on sat 110 last time I installed a TP file.

are you using 21500 or 20000?

[ssr316]

are you using 21500 or 20000?

I believe its 20000.

[dishuser]

I believe its 20000.

then that's why you don't get it

[steven charles]

I just did a factory default on my box and after rescanning I can't get the HD channels on 119. There's only a handful, but it'd be nice to have them. I believe espn hd (9424), tnt hd (9320) are two of those that are missing. Also, I can't seem to find it on lyngsat. It should be under TP 12311 according to what I've read.

Can someone help out?

Thanks.friend try posting the settings for each sat your pointing too,and whats the signal and quality your getting on each sat,that way will know how come your not getting those channels,good luck friend....

[ssr316]

then that's why you don't get it

how do i fix that?

[dishuser]

how do i fix that?change 20000 to 21500 and rescan that tp

[ssr316]

friend try posting the settings for each sat your pointing too,and whats the signal and quality your getting on each sat,that way will know how come your not getting those channels,good luck friend....

thank you, but i don't think its a question of signal strength...it was coming in just fine earlier and i haven't made any hardware changes

thanks for your reply though

[ssr316]

change 20000 to 21500 and rescan that tp

thanks for your help

i noticed that i have the same issue with a couple of the TPs on sat 82...i'm guessing i do the same there also?

in terms of editing the TP...there are some that are 20000 and have channels scanned....so is it only the ones that are 20000 and have none scanned that i edit? if so, do i make the settings equivalent to the ones that are 21500?

for example, for sat 82, the ones that are 21500 have the DVB setting as TB 8psk 2/3 and Pilot as Auto....and what of the H/V setting?

is there a file i can install to do this automatically or should it be done manually?

thanks again in advance

[dishuser]

thanks for your help

i noticed that i have the same issue with a couple of the TPs on sat 82...i'm guessing i do the same there also?

in terms of editing the TP...there are some that are 20000 and have channels scanned....so is it only the ones that are 20000 and have none scanned that i edit? if so, do i make the settings equivalent to the ones that are 21500?

for example, for sat 82, the ones that are 21500 have the DVB setting as TB 8psk 2/3 and Pilot as Auto....and what of the H/V setting?

is there a file i can install to do this automatically or should it be done manually?

thanks again in advanceyou can verify settings on lyngsat