one dish for both 72.7w & 82

[v4vball]

I have a triple Lnb holder pre-spaced for 101,110,119, however I don't have clear view for these birds.
is it possible to aim at 72.7w & 82 at the same time with this holder for a 18" X24" dish?

How? please explain in details . Cheers

[Terryl]

But one DP single LNB in the middle, this will be for 82W, put the next DP single LNB in the 101 spot this will be for 72.7, it will be off by a few decimal points but should work.

Next find the pointing info for 82 and 72.7 from your location, you will then point directly at 82W, peak and tweak on this satellite for the best "Q" on your receiver, and then skew the dish to find 72.7, also your receiver must handle the turbo 8PSK MPEG-4 transponders that are on 72.7.

Then have fun trying to find an IKS service that does 72.7

[StanW]

Then have fun trying to find an IKS service that does 72.7

....... on a seesat :)

[v4vball]

no, that seesat i started with is from a buddy of mine, I am getting the Jynxbox.
btw, I have two of these Lnbs


https://dl.dropboxusercontent.com/u/95519926/20130409_133128.jpg

they should be fine right?

[uppadharmai]

that is a lo frequency circular lnb for 118 and 119. why not just go with two ordinary circular lnbs (like for 110, 119, 91, 82, 61.5, 72.7, 77, and 129w)

[BanHammer]

aiming for 72.7 is pointless since there are no IKS providers that offer anything for that satellite.

since you can't get 110 or 119, you should go for 91 in addition to 82. there are a few guys here that carry the 82 and 91 satellites.