Log in

View Full Version : how to find right transponders 110w & 119W


headmeetwall
04-07-2013, 10:12 PM
I did a rescan yesterday to get the channels that have moved, didn't change anything else at all, and now having issues getting channels to come in. I did try another scan today got a few more channels but its still not right. CNN comes up with bad/no signal,so does 105. Any ideas would be greatly appreciated.
Ric551
04-10-2013, 08:54 PM
The" bad/no signal" channels are duplicated after scanning a second time, you'll just have to Delete those, you channels should be there!
Glatt
04-10-2013, 10:16 PM
To find transponders go to lyngsat.com
Glatt
04-10-2013, 10:20 PM
Also manually change on transponders from 20000 to 21500 TB 8PSK 2/3
headmeetwall
04-14-2013, 03:06 AM
I knew that the duplicate channels would need to be removed, I did find some came back after I switched the transponder to 21500, but are the channels missing or just limited right now :noidea:. That site/link was exactly what I was looking for Glatt, thank you very much for all your help.
gwrowe
04-16-2013, 04:39 AM
You should have fact defaulted, then rescanned!
scro99er
05-10-2013, 10:38 PM
Also manually change on transponders from 20000 to 21500 TB 8PSK 2/3


would this change be for ALL TP's on each of my birds
AeonFlux
05-11-2013, 12:24 AM
No. Some TP on each bird are 20000 and some are 21500. Each one has to be set according to what Lyngsat has posted. Now for the tricky part... some TP have both 20000 and 21500. So for these you have to make 2 separate TPs. One for 20000 and one for 21500. This will make more TPs than appear in the Lyngsat list but you will have done the right thing to get the unit to scan all possible channels on all TPs.

Why you not just use bigslim's channel list?