jynxbox v2 i can not connect to the server

[berber]

hi guys two weeks of forums reading programing factory defolts loaded 233,236,237 factory defolt after each one filled in the server info read everithing no luck with connecting or seing a channel i scaned the birds i can see the free channel like 101 signal is strong but connecting no chance i am confused pls help all i can see srver not connected and connection failed .is there a trick that nobody is posting or what.

[jventur9]

if the server settings you have enter are correct.just rebott and leave it on channel 105.for a few minutes.it will come on.
samething happen to a friend of mine.we were going crayzy trying to figerout and then it just connect it.

[berber]

if the server settings you have enter are correct.just rebott and leave it on channel 105.for a few minutes.it will come on.
samething happen to a friend of mine.we were going crayzy trying to figerout and then it just connect it.

i tried that but no success

[ruthie]

Double check your donation info ...if your missing a dot or anything will not connect...pm reseller to get info checked....make sure only one server is on at a time to start....all i can think off hand....

[iq180]

hi guys two weeks of forums reading programing factory defolts loaded 233,236,237 factory defolt after each one filled in the server info read everithing no luck with connecting or seing a channel i scaned the birds i can see the free channel like 101 signal is strong but connecting no chance i am confused pls help all i can see srver not connected and connection failed .is there a trick that nobody is posting or what.
what PS are you using, if it is rocket, 1. 2. 3. 4. look to see that you have the dot after the # if you don't it want work, I did read
that somewhere,LOL.

[sideswiper]

are you entering the server info the same as your code reads some come without Capital letters. If you donot enter exactly the same it will not work for you

[berber]

hi guys do you change anything in the network setting ,i have set up setup the server setting it 1 to 8 you turn one on you click on it then you fill up the ip/name,port,id,password,deskey. and press apply.

[El_Puerco]

if the server settings you have enter are correct.just rebott and leave it on channel 105.for a few minutes.it will come on.
samething happen to a friend of mine.we were going crayzy trying to figerout and then it just connect it.



Thankyou for the tip..nice one...

[El_Puerco]

can some one kindly?,give me the instructions or direct me to one.. how to set up V2HD for private sever. thanks.

Network and server instructions...

I try to make one for this receiver but i have hard time to explain well step by step ...:noidea:

Note: i think I am in the right place for this... ..

[meethd883]

I too am having the same problem....I've filled in all my info correctly clicked on apply and it says connection failed. Now, is it possible that I'm doing it incorrectly in regards to entering my info? If it doesn't work on the first line do I go to the next line, fill it in and if that line doesn't work go to the next line until one connects???? Also is the first line "NewCamd" or "CcCam"????

[sideswiper]

NewCamd and make sure you turn the server ON

[straffer1]

Same no connection problem here. unit has been unplugged for 5 weeks, worked fine before. Came home all i changed was the 1.rocketserver.tv setting and no go. even tried 185.8.106.71. plugged in my nanosat worked right away with new domain same settings. Been over the setting 20 times. Factory reset factory flash jbox even loaded new 2.39 bin no go. Good connection to the router same connection right over from the nanosat. Its like the ethernet port is toast or blocked. Any help would be great.

[Nostradamus]

when you make changes and it doesn't connect then double check all the data you have enetered. If everything is correct then reboot router and receiver

[straffer1]

hey got it working. The only way I got it to work was to adjust the available network address range on my router. it is defaulted at xxx,xxx.002 to .100. I changed it to .080 to 100. The jbox came right up. I factory reset the router and the jbox many times and did not work. This worked for some reason. Made the jbox pick another port, it was always picking .053 for some reason. Hope this helps someone.