PDA

View Full Version : Nano 2


lynskyn
03-06-2013, 05:44 PM
Hello recieved new code yesterday. No luck so far. I've done a factory default, rescanned, enter information it all seems to have been recieved but no connection. The clock is not correct, it takes settings than they change on their own. Andy advice...Please. Reciever was working fine until code situation happened.
abouttosnap
03-06-2013, 06:33 PM
Could be in ip settings. Been a while since I messed with mine but I seem to remember the ip settings can be a fickle. May have to put the ip in under manual first back out then if it connects go back in and change it to auto. On the clock sounds like you may need to adjust your time zone. Maybe some others can chime in as well because I could be mistaken or thinking of another stb. When you don't mess with some of em for a while it is easy to forget. lol Not to mention I'm not wrapped real tight to begin with. :D
lynskyn
03-06-2013, 08:20 PM
I hang on loosely myself :) Thanks! will cont to work on it. It's a bit frustrating. Last year I was good to go, this year I went blank :)
Costactc
03-06-2013, 08:26 PM
We are referring to nano2 to ilink?
clarkie
03-06-2013, 08:39 PM
If u have a Nano 2 it needs to be converted to a I-Link

Here is a link to the set-up....http://www.satfix.net/showthread.php?119096-CNX-Nano-2-iLink-conversion-USB-friendly
lynskyn
03-06-2013, 10:07 PM
Yes, converted to I-link after the Nano 2 crash. No difficulties until now. Did do the factory default, would this have effected the I-link conversion? Thanks!
Costactc
03-06-2013, 10:32 PM
No it shouldn't have any effect at all, mine has been working flawlessly with a new code.
lynskyn
03-06-2013, 10:54 PM
No it shouldn't have any effect at all, mine has been working flawlessly with a new code.


Thank! I'll eliminate that from the list.
lynskyn
03-07-2013, 12:03 AM
Could be in ip settings. Been a while since I messed with mine but I seem to remember the ip settings can be a fickle. May have to put the ip in under manual first back out then if it connects go back in and change it to auto. On the clock sounds like you may need to adjust your time zone. Maybe some others can chime in as well because I could be mistaken or thinking of another stb. When you don't mess with some of em for a while it is easy to forget. lol Not to mention I'm not wrapped real tight to begin with. :D


And IP Settings it is! Thanks! Rock on :)
kookaburra10
12-19-2013, 08:44 PM
Well, I'm happy it worked for you!! Not so lucky here however. I've even tried standing on my head... any thoughts out there would be greatly appreciated!
redrocker
12-21-2013, 03:00 PM
just wondering if turning off emulation helps
clarkie
12-21-2013, 10:00 PM
[QUOTE=redrocker;1029225]just wondering if turning off emulation helps[/QUOT


Yes.. post your setting, are u getting any quality on the sats ?
kookaburra10
12-22-2013, 01:19 PM
Thanks! Emulator is OFF. Quality on 110/119 is 95. Port 20000, LNB 11250, Time Adjust correct (which was an issue the first time I did this 2 years ago); what other settings would be helpful to know?
clarkie
12-23-2013, 07:51 PM
Post your setting LNB type ,DP, Legacy ?..port #..etc..the more you post of your set up the better we can help
kookaburra10
12-24-2013, 05:32 PM
Sats 110/119, LNB = 11250, Port 15551, emulator off. Sorry - what is DP & Legacy? Obviously not up to speed in terminology. I can scan both sats without trouble but no connection. Do I need to reload the NPN & 1.29 files? I have them downloaded to a USB stick but don't have a clue how to download them to the receiver. I did find a how-to but the instructions say to hold a button on boot that doesn't exist on my box. Thanks much!