nanosat se

[kennet]

here`s 1 for the books

I got a new nanosat se and it will not work with a dysc switch only get 15% single
but with a sw44 I get 90 to 95 % but losing a lot of channels
I tried 5 different switches and on go is there a power setting on the nano sat se that yo turn on other than lmb power?????

[Narcon]

Didn't it come with a manual?

[torpainter]

Your settings are likely wrong
Post your hardware set-up in detail and your settings for your sats

[kennet]

what should they be??
i`m useing sky 3.20
now every channel is scrambled

but working in nfusion so i know my dews are good

[torpainter]

I can't tell you unless you help Post your lnb type switch type and your settings as they appear in channel search for echo 10 and echo 14

[Chris_McAloney]

If your dews are working in your nufusion then if it is only one set of dews you will always get scrambled for the nanosat as you are already running your dews.you need 2 separate sets of dews.one set for each receiver.
What type of LNb's are you using as well?
Post back with the informtion requested from above post.