Direct Tv Slim Line dish pointing help.

[R0ckingsidewayz]

1767117672176731767417675

Ok that's my setup, and I know how to set up and find the satellites 119 and 110 on my Limesat ultra but I'm having trouble setting the elevation and skew. Basically I took this DirectTv Slim Line Dish off my parents back porch and put it on this pole and now I'm just turning it left and right.

I didn't adjust the elevation or skew yet. Just by swiveling it left and right on the pole I found 110 one day and had the signal at 80 and quality at 99. But 119 was not coming in. I'm not sure how many wires I need to connect and if I need to use a splitter. I've only had to deal with the receiver before when I first had it hooked up.

I've found out that physically pointing the dish is a whole different ball game. Any suggestions. Thanks in advance!

[dishuser]

get a different dish
that one will only get one sat

[R0ckingsidewayz]

What about a dish network 500?

[dishuser]

What about a dish network 500?

that will do it

[R0ckingsidewayz]

How do I go about pointing it and hooking it up, since my Limesat only has one LNB In coaxial imput? And the LNB has 2 coaxial outputs 110, and 119.... Do I use a splitter, I got that switch...17676

1767717678

[dishuser]

How do I go about pointing it and hooking it up, since my Limesat only has one LNB In coaxial imput? And the LNB has 2 coaxial outputs 110, and 119.... Do I use a splitter, I got that switch...17676

1767717678
that lnb has a builtin switch

[R0ckingsidewayz]

But it has to coaxials on it, one coming out of the 110, and one out of 119, so do I just hook up one side...like hook up my line going to my receiver going to the 110 side and then it will pick up the 119 through the 110 side..?

[dishuser]

But it has to coaxials on it, one coming out of the 110, and one out of 119, so do I just hook up one side...like hook up my line going to my receiver going to the 110 side and then it will pick up the 119 through the 110 side..?

it's a twin for 2 receivers
one line per

[R0ckingsidewayz]

I was confused by that last post. So I just hook up one line to one output on the LNB and that's it? No need to mess with the other output on the LNB?

[dishuser]

I was confused by that last post. So I just hook up one line to one output on the LNB and that's it? No need to mess with the other output on the LNB?

exactly
unless you get a 2nd box

[R0ckingsidewayz]

Thanks bro. I think I know what I need to do now. If I have questions with pointing it ill be sure to get ahold of u. Thanks later