please help

[roberts]

hi i have a nfusion and would like to get it working on iks private server with out have the pc on can you help me out

i went thu the (Xtreme Instruction for Nfusion SD Only step by step) and still no tv


thanks

[budyyy]

As always check to make sure settings are correct. You can download noi to test your server codes.. Then check in the phoenix settings menu and post what it says.. should say R3X ''something''. If you're using IKSR or Rocket, try the serv-pro bins.. For whatever reason I could never get the extreme bin stable but the servpro works wonders (despite the many small nuicances and glitches).

[roberts]

hi where i can get the serv-pro bins


As always check to make sure settings are correct. You can download noi to test your server codes.. Then check in the phoenix settings menu and post what it says.. should say R3X ''something''. If you're using IKSR or Rocket, try the serv-pro bins.. For whatever reason I could never get the extreme bin stable but the servpro works wonders (despite the many small nuicances and glitches).

[budyyy]

Ill attach it here and pending approval from the mods, I will upload it to the file section. xxxxxxxxxxxxxxxxxxx

Just remember to do a factory reset before and after you load the bin.. For whatever reason this seems to help.
To get into network the password is 1234

[roberts]

ok thanks so do i just go and load on the file and i should be good ??

Ill attach it here and pending approval from the mods, I will upload it to the file section. xxxxxxxxxxxxxxxx

Just remember to do a factory reset before and after you load the bin.. For whatever reason this seems to help.
To get into network the password is 1234

[budyyy]

It's in the readme.txt file


1) Boris must first be converted back to NF, NF boxes not running boot bin 1.26 must be loaded with boot 1.26 by loader in boot mode.
Boxes using 5.8, 5.9 and so on can be directly loaded in main mode

2) This bin is preconfigured for 1 server/port as per file name. Apply user and password only; menu/system settings/s/w version/
and password = 1234

3) This bin connects only on server 1. If bin is accidentically set to server 2, push "text" on remote to set to server 1

4) If a dead channel is selected, box may need to be rebooted with the remote power button.

5) The user and password can be configured using only the number keys on the remote. Hit menu after entering to save.

6) Double check the diseqc settings after scanning sats, sometimes they need to be re-entered

7) Set network to DHCP, This sw usually requires a hard reboot after first usuage, then all is normal

[roberts]

i wish this was easy but i was trying for the hole day and still not getting any way the only ch that is working in 101 the free ch.

if there is any one out there right now that working the nfusion i would like for you to help me out with my

thanks.
It's in the readme.txt file

[budyyy]

Sorry it didn't work out for you man.. i know a few other people who can't make it work. Unfortunatly due to my current network setup it is the only bin that works. The others can't properly authenticate the dhcp.. speaking of which check your network settings and make sure you're getting internet acess on the box.. check the weather with the noi bin or make sure the dhcp fields are all full.

[msc117]

get activacentro service,,,they give you 3 files to load,,,,enter name and password and boom,you will be back up

[roberts]

where do i get activacentro service from send me a link thanks
get activacentro service,,,they give you 3 files to load,,,,enter name and password and boom,you will be back up

[msc117]

pm zoogor or tirolocup ,,,after you buy from them,they will send files and instructions on how to load