Help needed

[Aliamus]

I tried to use the work around suggestion below to stop the constant freezing and ended up with no tv at all. First of all I couldn't create server 3 nor 4 so I by mistakenly changed info on server 2 to the same info as server 1. I've deleted that info but no tv. Any help to resolve this would be greatly appreciated.

This is what I tried to do:

For example go into the net applications and select copy. In the source server select 1 and in the target server select the blank space below 2. It will still show as 1 but after all is said and done it will show up as server 3. Now hit copy. Back out to viewing and you should now see connected to server 1, 2 and 3. 1 and 3 are now connected to the same server so all you have to do now is enter the new info for the third server into 1 and you should now be able to run 3 servers. You can also do this to run 4 servers. Once in the net applications menu just select the space with the weird symbols in the drop down menu and this will show as server 4. I ran on 3 and 4 for over a month. Seem to run just fine. This is not a fix but more or less a work around if someone wants to run up to 4 servers. From my read the options were already there just not completed. Tried it on the latest file out and the oldest results seem to be the same.

[hutch]

put in 00000 in the ports you erased

[abouttosnap]

Seems back when I made that post they where having other issues that where server related instead being an issue with the stb. It is still good for anyone wishing to try and run more than two slots but probably won't help freezing issues as they have changed domain and ip once or twice since I made that post.

As far as zeroing out the info in slot 3 or 4 it is best to zero out both 1 and 2 then copy that info into slot 3 or 4. Factory reset and or factory file will not clear the info.

[bad1]

Copy your blank info to slots 3 and 4 that you would have hit the reset