domain changes

[earnhardt323]

hello, ive made the domain changes from 2.nfps.bz to 2.nfps.co - and not connecting to server, i noticed there are ip #'s that changed too, from old ip 79.142.79.21 to 37.46.112.230 the problem is i cant find out where to change the ip #, is it in reciever settings, been trying for a couple of days with no success,,,any help would be appreciated,,, thanx

[fluffy]

Where you put in the domain name change that to the ip number.

[earnhardt323]

tried that nothing, wont connect to server

[jazzman]

Have you checked your code to see if it's still active? Also, what receiver are you using...

[earnhardt323]

i have checked code all good there,,running nfusion phoenix,, running good until mon night, went into noi settings, changed domain from 2.nfps.bz to 2.nfps.co and now wont connect to server ,, im lost lol

[djrm54]

change to 2.nfpstv.co or .com

[earnhardt323]

nothing,,,,thanx for replying that was the only thing i changed 2.nfps.bz To 2.nfps.co and wont connect to server now,,,strange

[hutch]

For those using ip in their receivers, noi, or rq instead of domain

Use for domain name xxxx.co ... from Rocket on same server

so check your code to be sure you're on the right port & donation is still active at iksprivateserver.com/search/

[djrm54]

add tv.co to your domain settings.you only have .co not tv.co.give it a try.

[gwrowe]

The only 2 domain names that can be used for the 2nd server are 2.nfps.co or 2.nfpstv.com, from official site, I know the IP 37.46.112.230 does work, because I was testing a new code for a friend of mine yesterday, and I am using NOI. Try putting in the info again, sometimes, can screw up, and don't know it, also try starting your Noi program first then turn on your receiver.

[earnhardt323]

thank you all for replying, im learning alot from your imput, it was up & running for an hour but i see we have another ecm,,,,my oversight was i didnt have the second dot....2.nfps.co worked ,,,,, thanx again much appreciated

[celica]

Tried everything above. No help. Won't Connect. any thoughts? thanks in advance

[davescarbs]

you changed your domain and the ip# did you re boot everything the reciver and the modem

[dishuser]

you changed your domain and the ip# did you re boot everything the reciver and the modem

you can't change both...lol

[celica]

tried changing both one at a time, since they're entered on the same line. Still cannot connect on port 16010. Tried rebooting modem and router every time. I'm running a 9500 in Static mode, since I could never get DHCP to work. Is there some trick to get DHCP to work? Is it better than running in Static mode? Still cannot connect

[celica]

got it working finally. DES keys were corrupted. Had lots of extra numbers. Not sure how that happened. Re-entered key and all is well. Thanks for everyone's help. Happy surfing