sd

[mucker11]

good day well got the files / loaded all files needed for nfps 5 times everything seems to be fine but when i turn it on i have guide channels are there / it keeps saying update system not scrabled channel any ideas thanks ???? nfusion sd [ this is what ive done so far ] was using boris ???
Xtreme Instruction for Nfusion SD Only
- If you are already using Boris T4 / T54 bin, start on step 1
- If you are already using NOI bin, start with step 5
- If you are already using Nfusion 58W bin, start with step 7
- If you are already running on an older Xtreme bin, just load the latest Xtreme bin in the
“Main” using the Nfusion loader.
1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.
2. Load this file u48 factory file from July 2009 also in BOOT mode.
3. Load this file next... boot file v.130 also in BOOT mode.
4. Load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.
5. Load the file named boot_126.bin.in BOOT mode.
6. Load the file named nfusion_factory_U17.bin in BOOT mode.
7. Load the latest XTREME file (XSTV*.bin) MAIN mode.
8. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default
9. Now Menu TO Newcamd Setting > Server Info>OK> 5585
Enter your info

[jrocker]

hey mucker try restoring your phoenix to original condition if you have converted and you find that it was not working, then to restore to NFusion original condition do the following:
1. Load Boot file boot_g3x_to r3x_v1.23.BIN in BOOT mode.
2. Then loaded the following files in BOOT mode
a) nfusion_factory_U17.zip
b) 080305_nFusion_Factory_U27.zip
c) nfusion_boot_v130(2).zip


Then load most recent bin 090928 sol v153 1


the start over again from scratch good luck mucker

[viper]

make sure when you add des key put 61 space then next number space and so on

[mucker11]

good day where can i find 080305 u27 file thanks