need help to get nano2 running

[darryl]

hi there im new and i have private share and want to get it running but dont know where to put any info

[clarkie]

Your need to convert your nano2 to a Ilink, there are how to guides in your STB section to do this


http://phoenix.satfix.net/showthread.php?119096-CNX-Nano-2-iLink-conversion-USB-friendly

[darryl]

ive done that a long time ago dont know where im suppose to put the info i got for private sharing

[ruthie]

ive done that a long time ago dont know where im suppose to put the info i got for private sharing

Its all in cnx nano2 files/guides etc section.....


heres a cut and paste from that section.....thanks to them for posting the how too....

go into your network tab then net applications
the default setting is EPCS which is ilink's public server
Change the EPCS to Dream
once you do that you should set the settings like the picture that I will post
Mind you this is for use with the IKSprivate@erver so if you use another you will use a different domain name and server port #

In the "Authorization" area you will input your user ID and password which on the iksprivates@rver is the same

also input the des key which is also input into the des area
GO to main menu -> accessory (last menu on the right) -> key works and turn EMU OFF. Very important step !

now if you exit your settings will stay how you put them so at this time exit and then re enter to make sure all your settings are correct

after so go back into network and into IP Setup for after doing the factory default the IP Setup area goes to "not used" so turn it back to "auto" or "manual" or whatever you used before

[clarkie]

ive done that a long time ago dont know where im suppose to put the info i got for private sharing

Your welcome. if you post what you need and the info WE need to help you ..its much easier to help..spoonfeeding..time for people to start reading again

[meethd883]

Hi ruthie:I'm also new to this game and I've set my Nano2 as you've laid out. i've come to the part that you mentioned
posting a picture of the dream "settings". Could you tell me where this picture can be seen? Thanks/

[dishuser]

Hi ruthie:I'm also new to this game and I've set my Nano2 as you've laid out. i've come to the part that you mentioned
posting a picture of the dream "settings". Could you tell me where this picture can be seen? Thanks/

network settings

[meethd883]

Thanks dishuser.

[dishuser]

Thanks dishuser.

you're welcome

[1nguyen]

how to do factory reset that is very important first time to use it . Thank you very much for helping.

[mcdonald35]

hi everyone hoping someone can help my with this isssue i am having. started up my nano2 this morning and it wouldnt boot just stayed saying c108 on front of reciever. tried loading in the latest factory file from the computer but still having same issues any thoughts

[abouttosnap]

hi everyone hoping someone can help my with this isssue i am having. started up my nano2 this morning and it wouldnt boot just stayed saying c108 on front of reciever. tried loading in the latest factory file from the computer but still having same issues any thoughts

You may want to try one of the older factory files like the 8.05ldr. It's been said that some have more success with this version. The file are in the are in the file section.

[mcdonald35]

You may want to try one of the older factory files like the 8.05ldr. It's been said that some have more success with this version. The file are in the are in the file section.

thank you!! 8.05.ldr seems to have recovered it for me i appreciate the help!!

[abouttosnap]

thank you!! 8.05.ldr seems to have recovered it for me i appreciate the help!!

That is Great news!! I'm glad you got it going! :thumbsup:

[mcdonald35]

when i got it back going it came up with a zero on the front and a menu but i couldnt upload a file via usb or do anything else i read elsewhere a guy then loaded 8.10 then 1.29 so i tried that but now i am back to having just c108 displaying do i have a problem with my reciever or what else can i do with factory file 8.05 loaded.. thanks

[abouttosnap]

when i got it back going it came up with a zero on the front and a menu but i couldnt upload a file via usb or do anything else i read elsewhere a guy then loaded 8.10 then 1.29 so i tried that but now i am back to having just c108 displaying do i have a problem with my reciever or what else can i do with factory file 8.05 loaded.. thanks

I've got one of the nano2's but so far I've never run into the c108 error so I'm not sure if there is a loading order or pattern that may help you convert it over. If you got it to load the factory file then I would say the receiver is ok. Just a question of the pecking order so to speak.

If it was me I would try some of the older third party files to see if it would load them via usb. May have to give it a short break in between file loads to see if it maybe a timing thing.

Or maybe try to load the factory files via usb in there order till you get back to the 8.10.

[mcdonald35]

i put the 8.05 back into reciever. i didnt no how to get the usb to come up with it on there thats when i tried using loader on computer and the rs232 port which didnt work. i now figured out how to get usb to load the files on the screen so i have successfuly loaded the 1.29 file about to load the coversion.. thank you again for all your help!

[mcdonald35]

make sure when the screen comes up to click the fn button at top of remote to be able to load files..

[abouttosnap]

i put the 8.05 back into reciever. i didnt no how to get the usb to come up with it on there thats when i tried using loader on computer and the rs232 port which didnt work. i now figured out how to get usb to load the files on the screen so i have successfuly loaded the 1.29 file about to load the coversion.. thank you again for all your help!

Always happy to help if and when I can. Great to see it worked out. :yes: