i have lost a ton of channels

[firpo]

i dont no if its my hardware but i checked my signal and quality with my coolsat and it was very good around 90%so i think im good on being locked in the sat out side i 1 smaller dish and the other is the 33inch dish. i have a single lnb for 110 and the big dish get the 119/118 and also what kind of scan is best and do i scan them separately?

the setting on nano r as follows

Echo 10/11 110 W
DiSEqC 1.0: PORT A
DiSEqC 1.1: None
TP Frequency: 12224 20000 V
LNB: 11250
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

Anik F3 118.8W
DiSEqC 1.0: PORT B
DiSEqC 1.1: None
TP Frequency: 11715 20000 V
LNB: 10750
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

Echo 7 119W
DiSEqC 1.0: PORT B
DiSEqC 1.1: None
TP Frequency: 12155 20000 H
LNB: 10750
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

[steven charles]

friend why don,t you try tp 12297 on sat 118-119 with your nano and re-scan the sats,good luck friend.....

[firpo]

im getting a highier sig/quality at this setting


friend why don,t you try tp 12297 on sat 118-119 with your nano and re-scan the sats,good luck friend.....

[arodfan]

This is a problem I have been experiencing myself and after doing some research I found that I guess channels got moved. There is a re-scan involved, but with what tp settings? That I don't know and am still looking for.

i dont no if its my hardware but i checked my signal and quality with my coolsat and it was very good around 90%so i think im good on being locked in the sat out side i 1 smaller dish and the other is the 33inch dish. i have a single lnb for 110 and the big dish get the 119/118 and also what kind of scan is best and do i scan them separately?

the setting on nano r as follows

Echo 10/11 110 W
DiSEqC 1.0: PORT A
DiSEqC 1.1: None
TP Frequency: 12224 20000 V
LNB: 11250
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

Anik F3 118.8W
DiSEqC 1.0: PORT B
DiSEqC 1.1: None
TP Frequency: 11715 20000 V
LNB: 10750
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

Echo 7 119W
DiSEqC 1.0: PORT B
DiSEqC 1.1: None
TP Frequency: 12155 20000 H
LNB: 10750
22Khz Tone: OFF
Multi-Dish Switch: OFF
Search Options: All Channels
LNB Power: ON

[Peachseed]

I don't know what kind of lnb you have for 118.8/119 but the lnb setting for 119 is 11250...

[dishuser]

I don't know what kind of lnb you have for 118.8/119 but the lnb setting for 119 is 11250...

no it isn't

[Peachseed]

You can have two lnbs, one for 118.8 and one for 119...but your port setting would be B and c...I have not used one of the newer lnbs...I guess you saw that...thanks...