1 coaxial cable needs to split for 2 receiver

[don genaro]

Hello all. I have 2 dishes 1 for dn & 1 for bev.coming into my house

via 1 cable, needs to feed 2 receivers 1 for dn other for bev tried

different splitters but always bev receiver said ''weak signal''

What to get??

Thank you

[fn59]

Can't be done.

[anyonomus]

U will have to run a separate cable from each LNB and add another switch so u have a separate cable for the second receiver.. ..
The splitters will not work because when a channel is selected it automatically chooses horizontal or vertical polarization..
The 'master' receiver chooses which one is selected.... and the second receiver will not work..
Also if u are using provider equipment(receiver/switch).. an FTA receiver will not work(well) with the switch provided by them..

[dishuser]

U will have to run a separate cable from each LNB and add another switch so u have a separate cable for the second receiver.. ..
The splitters will not work because when a channel is selected it automatically chooses horizontal or vertical polarization..
The 'master' receiver chooses which one is selected.... and the second receiver will not work..
Also if u are using provider equipment(receiver/switch).. an FTA receiver will not work with the switch provided by them..since when?lol

[don genaro]

Thank you. Finally changed my mindset and worked on the SOFTware aspect

of the problem instead of the HARDware,entered the info of 1 receiver (dn)

into the other one and ...VOILA!! Sometimes we just get stuck into one way

of looking at things...